Construction before the completion of the renovation of the villa design decoration glass decoration process glass
The most important thing to our customers is that they keep their excavators working reliably and efficiently. This means that when you are carrying out servicing and maintenance you want quality Sumitomo Excavator Parts that are compatible, reliable, readily available, and provide long service life.
With solutions available for over 220 Sumitomo excavator models, we are sure to have the Sumitomo final drive or Travel Motor you need.long-standing final drive provider.and 15 month warranty on final drives.
Sumitomo Final Drive,Sumitomo Final Drive Assy,Sumitomo Travel Motor,Sumitomo Travel Gearbox,Sumitomo Final Drive Spare Parts,Sumitomo Drive Parts,Sumitomo Motor Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.jhexcavator.com
First, technical issues. As an engineering project, especially the decoration project, the construction process is complicated, there are many kinds of materials, and there are many types of construction workers. This requires that we as the on-site construction management personnel must do a good job of technical preparation. First of all, we must be familiar with the construction drawings. We must do our utmost to optimize every process, every subproject, and consider our own Resources (construction teams, materials supply, funds, equipment, etc.) Each climate and other natural conditions should be carefully and reasonably prepared for the construction organization plan, and be represented by a crossbar diagram or a network diagram, from the largest to the smallest, from the surface to the smallest, to ensure Each sub-project can be included in the scope of control. Secondly, according to the characteristics of the project, in addition to a reasonable construction organization plan, it is necessary to make technical preparations for the specific construction process, especially the construction process required by high-tech. The technical reserves include technical management personnel, technical foremen and workers, training of new technologies and processes, construction specifications, and technical exchanges. Only with high-quality technical management personnel and insight into the specific construction process can we ensure that every process step in the construction process is under control and know how to deal with emergencies in all aspects in order to ensure timely Guaranteed finish. Through planned and targeted training and technical disclosure, construction technicians and foremen can familiarize themselves with new construction techniques and new material characteristics, jointly improve technical operation and construction levels, and thus ensure construction quality. Furthermore, from a technical perspective, Whether construction quality problems meet the relevant design requirements and relevant standards and standards, and it is not enough only to make strict requirements for each process in the construction process. There must be a corresponding quality inspection system, and establish a perfect quality inspection. Institutions and quality inspection methods must be scientifically demonstrated. Therefore, technical reserves must be prepared and different quality acceptance standards should be proposed for each process and each construction process in order to ensure project quality.
Second, material issues. Compared to civil construction, decoration engineering has its own inherent characteristics. The main aspect is that it requires a wide variety of materials, and there are often many problems with the application of the latest materials. Therefore, for the problem of materials, the following aspects of the material must be solved. 1, material supply. Cooperate with the designer to determine the brand, material and specifications of the required materials, carefully measure the quantity of the required materials, and organize the suppliers to supply the materials. 2, material procurement, in the face of a wide range of material purchase orders, must be the number (including actual loss), brand, specifications, origin, etc. one by one clearly marked, size, material, template, etc. must be in place to avoid material orders do not match, This will affect the progress of the project. 3, material classification stacked. According to the actual site conditions and progress, the materials should be properly arranged, the materials should be accepted into the field, sampled by sampling, and reported to Party A, the design agency, and Sorting classification, according to the construction organization floor plan specified location classified piled up on different sites. 4, materials issued. Use tracking, clearance. For on-site materials, the inspection and registration of the inventory shall be conducted in strict accordance with the construction schedule and the use of the material delivery order, and the distribution materials shall be traced to avoid material loss or waste. In particular, it is necessary to strictly control the section blanking. For the inventory of materials, the warehouse clerk must organize the inventory in a timely manner, and pay attention to the material protection measures that must be taken for the classification and storage of various materials, flammable materials, and moisture-proof products.
Third, the issue of construction. The key to construction is progress and quality. For the progress, in principle, according to the original construction plan. However, as a project, the situation on the spot is ever-changing, such as material supply, design changes, etc. It is inevitable that it cannot be modeled. It must be adjusted and arranged according to actual conditions. Whether or not the quality of construction can be guaranteed, the most important thing is that each process must be completed strictly in accordance with the requirements of the relevant national regulations and relevant standards, and it is strictly forbidden to cut corners. The "three-inspection" system must be implemented, that is, self-inspection, special inspection, and joint inspection. After passing inspections and inspections at the layers, it is allowed to enter the next process, so as to ensure the quality of the entire project.
Fourth, the problem of personnel management. In a certain sense, people are the key to determining the success or failure of engineering. All engineering projects are created through human organization of materials. Only a creative and disciplined construction team can complete a quality project. How can we effectively synthesize the technical management personnel and technical workers in the construction team into the Guards? First of all, it is necessary to create an atmosphere of honor and discord, with clear responsibilities but no disappointment, so that all employees feel that they are part of the family of this project. This will require our construction site management personnel to give full play to their talents, clear penalties for workers, encourage more and organize various types of production and life competition activities, and cultivate cohesion from both spiritual and material aspects. Second, the management system of the construction team must be clarified. The duties and responsibilities of each job should be clearly defined and it must be done. A strict and disciplined construction team, in the face of tight deadlines and technically complex projects, can only fulfill the construction tasks on time and quality, only by resolutely obeying the command. Furthermore, the proper use of economic leverage for specific situations will have an unexpected effect on personnel management.
Fifth, data management issues. The management of a project, in addition to the identification of materials, construction, technology, and personnel, there is a problem that cannot be ignored is the management of data. Acceptance of any project must have an item of salary renewal. The material certificate, inspection report, as-built drawing, acceptance report, design change, measurement record, concealed project acceptance form included in the as-built data, relevant technical parameter acceptance acceptance form, working contact letter, project visa, etc. all require us to During the construction of the project, attention should be paid to collecting and filing. If there are any omissions, it will result in unnecessary losses through completion acceptance and project settlement, and some of the effects will be incalculable. Sixth, product protection issues. According to the characteristics of the decoration project, the protection of the finished product can be described as crucial. As a final process, any small damage will destroy the beauty as a whole and affect the acceptance of the project. For product protection, it must be combined with active and passive protection. The so-called initiative, that is, to take corresponding related to the prevention of mandatory systems, such as the use of iron ladders on the finished floor is not allowed, and so on, the so-called passive, that is, to take relevant anti-collision and other means to protect the finished product, such as glass and other fragile goods Cover plywood and other measures. In short, we must talk about the protection of finished products every day, every day, every day, every day and every day.
We can supply Final Drive motors for a wide range of Sumitomo excavators. See the list below to find the model of your Sumitomo excavator and if it is not among the models listed, please don't hesitate to contact us. We sell our final drive motors al wholesale prices because we import large quantities direct from manufacturers without intermediate dealers, thus we can provide spare parts for our products easily. For a free quotation and further details, please fill in the form. Our sales department will contact you within the shortest delay.
All our Sumitomo Drive Parts are designed and manufactured in our China factories or are sourced from leading global manufacturers with a reputation for high quality products.
We also offer fast delivery and strong follow-up support for your Sumitomo Excavator parts, thanks to eight China warehouses and our comprehensive Cutting Edges Warranty on all parts.