Plant Growth Light,Plant Growing Lamp,Phyto Lamp,Plant Light SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com
Second, the amount of charge fabric friction tester wherein <br> <br> friction fabric the amount of charge by the Faraday cup tester, a rotary drum dryer and electrostatic potentiometer friction composition.
Put the antistatic clothing rubbed by the roller friction machine into the Faraday cup to measure the charge of the antistatic clothing.
Power Supply: AC220V, 50HZ, 50W
Third, the fabric frictional charge tester operation steps 1, the roller friction power cord plug into the power outlet (ground wire must be connected).
2. Open the roller friction machine power switch and set the test time to 15?min.
3. Put the sample in the roller friction machine to run. After 15 minutes, the roller friction will stop automatically.
4. Connect one end of the dedicated connector of the electrostatic potentiometer to the input port of the charge tester, and connect the other end to the socket on the outer tube of the Faraday's cylinder.
5. Turn on the power of the charge meter - turn the power switch up to the "1" position.
6. Press the "Clear" button to make the charge meter display zero.
7. After the roller friction machine is automatically stopped, remove the sample directly from the roller friction machine with an insulating rod (or wear insulation gloves with an insulation resistance of 10?12Ω and take it out directly) and immediately put it into the Faraday cage. Attention should be paid at this time. The distance between the sample and the human body, metal, etc. is more than 300 mm.
8. Read the reading of the static electricity tester, the unit is micro bank (μC).
9, repeat the test 5 times. Between each test and test, separated by 10 minutes, before each test, the sample and drum lining standard cloth should be dealt with.
10, take the average of 5 times, if the charge is less than 0.6μC, then meet the national standard GB12014-2009 "anti-static clothing" Class B requirements.
11. After the test is completed, turn off the power switch and unplug the power plug.
Sixth, pay attention to matters 1, the system's Faraday cylinder tube should be reliably grounded.
2. Please reset the charge measuring device before each measurement.
3, measured objects must be out of power.
4. Before the test, please turn on the power switch to warm up the machine for 15 minutes.
5. The lining work clothes should be turned outwards, and the cold clothes should be tested after removing the liners and linings.
6, roller friction
Fabric triboelectric charge tester operating instructions
First, the amount of charge fabric friction tester main purpose <br> <br> fabric frictional charging charge amount tester is used to measure the amount of charge antistatic clothing, equipment consists Faraday cup, an electrostatic potentiometer and a friction roller machine. Note: Static potentiometers are also commonly referred to as electrostatic meters. They are mainly used to display the charge of textiles such as anti-static clothing and anti-static fabrics.