Globe Valves ,Globe Valve ,Globe Valve Types,Y Pattern Globe Valve WENZHOU DIYE VALVE&FITTINGS CO.,LTD , https://www.diye-valve.com
The polyvinyl chloride coil floor is based on polyvinyl chloride resin as the main raw material, adding appropriate additives, and is produced on a sheet-like continuous substrate by a coating process, and is divided into a foamed polyvinyl chloride sheet with a substrate. There are two kinds of compact polyvinyl chloride coiled floor with floor and substrate. The width is 1800mm, 2000mm, each roll length is 20mm, 30mm, and the total thickness is 1.5mm, 2mm.
PVC vinyl flooring is suitable for the laying of living room and bedroom floors (mid-range decoration). The selection of materials should be excellent products or first-class products.
The area required for coil flooring can be calculated by multiplying the laying area by 1.10. If the width of the coil floor is exactly the clear width of the room, then 2% loss can be taken into account. The floor of the coil can be retailed, and how much it needs to be purchased. The plot should be carefully planned to avoid waste.
PVC block floor is PVC and its copolymer resin as the main raw material, adding fillers, plasticizers, stabilizers, colorants and other accessories, produced by rolling, extrusion or extrusion process, a single layer And homogenous two kinds. Its specifications are 300mm × 300mm, thickness 1.5mm. Each floor area is 0.09, and the block floor loss rate is 2%.
The coiled floor is wrapped with a wear-resistant layer rolled on the core and packaged in corrugated boxes. The name of the product, the name of the manufacturer, the date of manufacture, the lot number, grade, color, quantity, weight, etc. shall be indicated on each roll or box. No impact, sun exposure, or rain may occur during transportation. The indoor storage air must be circulated and dried. It must not be less than 1m away from the heat source. Coiled floors should be piled upright.
Reasons and Preventive Points for Uneven Flooring of Plastic Flooring
Some households used plastic flooring when decorating the living room. After laying, they found that the surface was flat and the visual surface was wavy. The reason for this phenomenon is mainly due to the fact that the following points were not noticed during construction:
(1) The surface roughness of the grass-roots level is poor, and unevenness is uneven.
(2) When the operator scratches the adhesive, the gesture is heavy and the coated adhesive has a pronounced wavy shape.
When the plastic floor is pasted, the thinner in the adhesive is volatilized, the colloid flowability is poor, and the paste is not easy to smooth, so that the surface layer is wavy.
To prevent this quality problem, you must do:
(1) Strictly control the surface flatness of the adhesive base layer, and perform the leveling treatment on the surface with an unevenness greater than ±2 mm.
(2) Squeegee the adhesive with a toothed squeegee to make the thickness of the adhesive layer thin and uniform. When scratching, the scratching direction on the adhesive surface of the base layer and the plastic plate shall intersect vertically and horizontally so that when the surface layer is laid, the adhesive layer of the adhesive surface is uniform.
(3) The temperature of plastic floor construction should be controlled at 15 to 30 degrees, and the relative humidity should not be higher than 70%.
Floor without sound (plastic floor)
There are two kinds of vinyl floorings, polyvinyl chloride sheet flooring and PVC block flooring.