On the 27th, the General Administration of Quality Supervision, Inspection and Quarantine organized for the first time a national supervision and random inspection of children's furniture products. AQSIQ announced the quality of 61 batches of children's furniture products, and 33 batches of products did not meet the standards. Mainly related to problems such as unqualified edges and tips of furniture, and no warning signs. In the Wuhan furniture store, it was found that some of the announced problem brands were sold in Han, and many other brands of children's furniture also have places that do not meet the standards.   Edges and tips are the main failures  It is understood that this is the first time that the General Administration of Quality Supervision, Inspection and Quarantine organized the national supervision and random inspection of children's furniture products. AQSIQ conducted a random inspection of 61 batches of children's furniture products produced by enterprises in 7 provinces and municipalities. According to the requirements of GB 28007-2011 "General Technical Conditions for Children's Furniture" (officially implemented on August 1, 2012) mandatory national standards, 45 items such as structural safety, hazardous substance limits, warning signs and other items of children's furniture were inspected .  Among them, the "edge and tip" entry stipulates: children's furniture products should not have dangerous sharp edges and tips, edges and edges should be rounded or chamfered, and the contactable dangerous outer corners of the product below 1600mm above the ground should be rounded Treatment, and the rounding radius is not less than 10mm, or the rounding arc length is not less than 15mm.  A random inspection found that 33 batches of products did not meet the requirements of the standard, more than half of the total batch. Among the unqualified items, product edges and tips, and warning signs are the main unqualified items, accounting for 48.9% and 36.2% of the total number of unqualified items, respectively. Among the unqualified batches of furniture, most of the furniture produced in Guangdong Province reached 19 batches.  Don't choose furniture that is too bright  "Judging from the results of this random inspection, the main reason for the non-conformity is that some enterprises are not familiar with the newly implemented national standards and have not designed and produced according to the requirements of the standards." Relevant technical experts from Wuhan Quality Supervision Bureau said that Safety issues and warning signs of age are easy to identify, but they are also the most easily overlooked by consumers when buying children's furniture. Parents are advised to consider them as important considerations.  At the same time, when purchasing children's furniture, parents should carefully check whether the furniture test report is a simple plate test or paint test. When signing a sales contract, write down the environmental protection guarantee. If the merchant refuses to sign the guarantee, it is best Don't buy it. It is best to choose furniture with a small amount of binder, its formaldehyde content is relatively low (formaldehyde emission of children's wooden furniture should be ≤1.5mg / L).  In addition, do not choose furniture that is too bright, because most bright oil paints contain heavy metals such as lead.  Almost no children's beds in the store have warning signs  Yesterday, in the children's furniture brand area of a large home store in Wuchang , we focused on children's beds and children's desks. It was found that the "sampo Songbao Kingdom" and "Multi-love" brand products all have "margin and cutting-edge" unqualified problems in random inspection. The edges of the bedside backs, bedside cabinets, desks, wardrobes, etc. of the "Dear Favorite" brand are often left with corners, or the edges are not handled well.  The multiple batches of drawers detected in the random inspection have no anti-pull-off devices, 4 casters have no locking devices, and cabinets with a height greater than 600mm do not provide connections fixed to the building. These problems do not meet the structural safety performance. It is also very common in some cases. Some brand desk drawers completely fall off when pulled, and some cabinets are more than one meter high, but they can be easily pushed down.  At the same time, almost all of the children's beds sold in the store have no warning signs and fail to indicate the applicable age range according to the regulations, namely "3 to 6 years old", "3 years old and above" or "7 years old and above". (Editor: Peter)  Magnetic Level,Magnetic Level Gauge,Magnetostrictive Level,Float Level Gauge Wuxi Winsun Automation Instrument Co., Ltd , https://www.winsunwx.com
For the first time, the children's furniture supervision and random inspection of half of the quality of products failed
Â