According to the material classification, it can be divided into two categories: solid wood board and wood-based board. At present, in addition to the use of solid wood panels for floors and door fans, the panels we use are generally artificially machined panels. Bolt,Bolts,Crew Bolt,Threaded Bolt Jiangsu Jiajie Special Screw Co., Ltd , https://www.jiajiescrewcompany.com
1. According to the material classification, it can be divided into two categories: solid wood board and wood-based board. At present, in addition to the use of solid wood panels for floors and door fans, the panels we use are generally artificially machined panels.
2. According to the molding classification, it can be divided into: solid board, plywood, fiberboard, decorative panel, fireproof board and so on.
Variety of wood boards
1, solid wood board
As the name suggests, solid wood panels are wood panels made from complete wood. These plates are durable and natural, making them the perfect choice for decoration. However, due to the high cost of such panels and the high construction process requirements, there are not many uses in the decoration. Solid wood boards are generally classified according to the physical name of the board, and there is no uniform standard specification.
2, plywood splint, also known as plywood, commonly known as fine core board. It is made of three or more layers of one-millimeter thick veneer or sheet adhesive. It is the most commonly used material for hand-made furniture. The splint is generally divided into three specifications of 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT (1 PCT is 1 mm).
3, decorative panel decorative panel, commonly known as the panel. It is a decorative sheet with a single-sided decorative effect, which is made by cutting the solid wood board into a thin veneer with a thickness of about 0.2 mm and using a splint as a base material. It is a special way of presenting splints and has a thickness of 3 cm. Decorative panels are a high-end decoration material that is currently different from blending practices.
4, blockboard blockboard, commonly known as the large core board. The large core board is made of two pieces of veneer in the middle of the veneer. The price of the large core board is cheaper than that of the thin core board, and the vertical direction (differentiated by the core material direction) is poor in bending resistance, but the lateral bending strength is high.
5, particleboard particle board is the use of wood scrap as the main raw material, then infiltrated with glue, the additive is pressed into a thin sheet. According to the pressing method, it can be divided into two types: extruded particle board and flat pressed particle board. The main advantage of this type of sheet is that it is extremely cheap. The shortcomings are also obvious: the strength is extremely poor. It is generally not suitable to make furniture with larger or mechanical requirements.
6, MDF board, also known as fiber board. It is made of lignocellulosic or other plant fiber, and the artificial board made of urea-formaldehyde resin or other suitable adhesive is divided into high-density board, medium-density board and low-density board according to its density. MDF is also easy to rework due to its soft and impact resistant properties. In foreign countries, MDF is a good material for making furniture, but because the national standards for height plates are several times lower than international standards, the quality of MDF use in China needs to be improved.
7. Fireproof board Fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives. It is a new type of material that is being used more and more, and its use is not only due to fire prevention. The construction of fireproof board has higher requirements for sticking glue, and the price of fireproof board with better quality is more expensive than decorative panel.
Http://news.chinawj.com.cn Submission: