How to choose and use pesticides

In response to the problems of many pesticides on the market and the difficulty of selecting pesticides for farmers, this reporter interviewed Wang Xinglin, director of the Pesticide Professional Committee of the China Chemical Industry Association. He suggested that farmers should decide which one to choose based on crops and control objects, application equipment and conditions of use. Formulations and preparations are suitable.

First, the efficacy of the pesticide's emulsifiable concentrate is significantly higher than that of the suspending agent and the wettable powder. It is better to use the emulsifiable concentrate as the active ingredient of the same pesticide. However, the fungicide for foliar spray and the oil-based dosage form are not beneficial to the bactericidal action, and a suspending agent or a wettable powder should be selected. The herbicide for foliar spraying has a waxy layer on the surface of the weed leaves, and the emulsion containing the organic solvent, the concentrated emulsion, the suspending agent and the like can be selected. Formulations such as wettable powders, suspensions and the like which have good wetting and osmotic action are also available. Herbicides applied to paddy soils or soils are used in granules and other dosage forms that can be used to formulate toxic soils.

Second, as an alternative to the cream, the suspending agent is second to the emulsifiable concentrate, but significantly higher than the wettable powder. Since the particles of the suspending agent are much finer than the wettable powder, the various additives contained in the suspending agent facilitate the adhesion of the agent particles to the surface of the living body, thereby improving the efficacy.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

ASTM A554 Decorative Stainless Steel Pipes

ASTM A554 Decorative Stainless Steel Pipes is the main tubing line for a piping system. Generally, ASTM A554 Decorative Stainless Steel Pipes are made in stainless steel 304 and 316L, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both sanitary seamless tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified ASTM A554 Decorative Stainless Steel Pipes comply to your your condition and FDA,GMP requirement.

ASTM A554 Decorative Stainless Steel Pipes - Polished Stainless Steel Tube – Stainless Steel Hygienic Tubes
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical

Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.

ASTM A554 Decorative Stainless Steel Pipes,A554 Square Pipes,Stainless Steel Decorative Pipes

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com