There is long history in China to use natural herb and flavor.Benifit by abundant forest and plant resources in China,we take a lot of natural plant extracts to benefit people`s daily life.These products includes forest essential oil,grass essential oil,fruit essential oils,natural Borneol ,Myricetin etc.It can be usded in many indutreis such as pharmaceutical
Flavour And Fragrance
Flavour And Fragrance Natural Linalool Oil,Pure Natural Garlic Oil,Menthol Oil,Natural Wintergreen Oil shijiazhuang yihe-chem co.,ltd , https://www.yihe-chem.com
and medicine,cosmetic,perfumery,chemical industry,food industry etc.More and more people prefer to choose natural products. We supply following products in this segment:
Anise Oil
Peppermint oil
Menthol
Raspberry ketone
Linalool
Benzaldehyde
Benzyl benzoate
Hydroquinone
Dihydromyrcenol
Natural Garlic Oil
Natural Perilla Oil
Natural Spearmint Oil
Natural Cinnamon oil
Natural Wintergreen Oil
Natural Linalool
Natural Ho oil
Natural Camphor powder
Citral
How to solve the problem of product rupture after adding color masterbatch in the injection molding process?
Under the sunlight, there are stripe-like pigments in the product. To take this problem, we need to consider two aspects: plastic physical and mechanical properties and plastic molding process:
· The temperature of the injection molding equipment is not well controlled, and the color master cannot be thoroughly mixed with the resin after entering the mixing chamber.
·The injection molding machine does not add a certain back pressure, and the screw mixing effect is not good.
· The dispersibility of the color masterbatch is not good or the resin is not plasticized.
The process can be debugged as follows:
• Increase the temperature of the mixing chamber by the drop port portion slightly.
• Apply a certain back pressure to the injection molding machine.
If it is still not good after the above debugging, it may be the dispersibility or matching problem of the color masterbatch and the resin, and should be solved by contacting the masterbatch manufacturer.
After using a certain color masterbatch, the product appears to be more susceptible to cracking. This may be due to poor diffusion and miscibility caused by the poor quality of the dispersant or auxiliary agent selected by the manufacturer, which affects the physical and mechanical properties of the product. After using the ratio on the color master specification, the color is too dark (too light). Although the problem is simple, there are many possibilities, specifically:
1. The color master has not been tried hard, and the pigment is too little or too much;
2. The measurement is inaccurate when used, and the phenomenon of random measurement by SMEs exists in large quantities;
3. There is a problem in the matching of the color masterbatch and the resin. This may be due to improper selection of the carrier of the masterbatch, or it may be that the manufacturer randomly changes the resin type;
4, the machine temperature is not appropriate, the color master stays in the machine for too long.
Processing procedure: First check whether the resin type matches the color masterbatch, whether the metering is accurate, and then adjust the machine temperature or speed. If there is still a problem, contact the masterbatch manufacturer.
The same color masterbatch, resin and formula, why are the products of different injection molding machines color shade?
This is often caused by the injection molding machine. Different injection molding machines have different mechanical conditions due to different manufacturing, use time or maintenance conditions, especially the difference in the degree of adhesion between the heating element and the barrel, so that the dispersion state of the color master in the barrel is also different. A phenomenon will appear.
After changing the resin of another brand, the same color masterbatch and formula, the color has changed, why?
Different grades of resin will have different density and melt index, so the properties of the resin will be different, and the compatibility with the masterbatch will be different, so that color change occurs. Generally speaking, as long as the density and melt index are not different. Large, then the difference in color will not be too large, you can correct the color by adjusting the amount of color masterbatch.
Does the color shift of the color masterbatch during storage affect the quality of the product?
Some color masterbats have a high pigment content (or dye), and in this case, migration is normal. Especially the color masterbatch with dye added, serious migration will occur. However, this does not affect the quality of the product, because after the color master is injected into the product, the pigment is in a normal color development concentration in the product.
Why are some injection products not good?
There are several possibilities:
1. The nozzle temperature of the injection molding machine is too low
2. The mold finish of the injection molding machine is not good.
3, the product molding cycle is too long
4, too much titanium dioxide contained in the masterbatch 5, the dispersion of color masterbatch is not good