It is very important that the bathroom cannot leak water

In addition to the appearance of the bathroom in the decoration process, the most important thing is nothing more than waterproof. The bathroom is different from other rooms. It is normal to have water. However, if the bathroom is not waterproof, then the troubles that follow will be repeated one after another. How can waterproof measures be done?

Brand Shop: TOTO Sanitaryware

1. Ceiling: Because of the heavy moisture in the bathroom, choose materials that are waterproof, anti-corrosion, and rust-proof.

Second, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tiles are laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.

Third, the wall: wall tiles should also be good moistureproof and waterproof, and to ensure the formation of tiling flat, and to be seamed and aligned with the floor tiles, in order to ensure the integrity of the wall and the ground; if you encounter water supply pipeline exit The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.

Fourth, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.

V. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the location Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.

Sixth, waterway transformation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as the washing machine model, the location of the water will be different.

VII, sanitary ware installation: It is best to remember the hole distance before the decoration, according to the size of the bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet installation should be used to sit The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.

8. Ventilation and ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must have a retrograde gate to prevent the backflow of dirty air.

9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. When decorating, you can choose some shade-tolerant, hi-potted pots to be placed in the bathroom, making it a bit more lively.

Ten, hot water cups, etc. can not be placed directly on the furniture surface, leaving traces that are not easily removed. Colored liquids, such as ink, must be absolutely free from spilling on the table.

Links: Beware of the hidden dangers of poor quality decoration

Construction Acceptance Window Glass Switching Socket Electrical Glass Table Glass Tile Glass Sliding Door Glass Door Glass Furniture Toilet Sliding Door Bathroom Tile Bathroom Door Bathroom Tile Color Bathroom Wall Tile Toilet Door Size Bathroom Size Bathroom Wash Basin Total Bathroom Toilet Waterproof Bathroom Tile Tile Tile Adhesive

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification

Light Duty

Heavy Duty

Rang of the Door

Single-Leaf

Double-Leaf

Single-Leaf

Double-Leaf

Door leaf max weight

100kg

100kg x 2

200kg

200kg x 2

Mounting Method

Surface mounting or built-in mounting

Open Width

700-2000mm

650-2000mm

750-2000mm

650-2000mm

Power Supply

AC 220v ± 10%, 50-60 Hz

Opening Speed

300-500mm/s (adjustable)

Closing Speed

250-550mm/s (adjustable)

Creep speed

30-100mm/s (adjustable)

Hold-open time

0.5-20s (adjustable)

Airproof Force (Max.)

>70N

Manual Pushing Force

<100N

Electronic Lock Force

>800N

Power consumption

150W

Ambient temperature

-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com