Keep production away from blood and death

In June of this year, it was the 11th "Safety Production Month" in the country. The first week of the month was "Education Week of Safety Production Accidents."

Recently, the reporter collected four cases of typical accidents in various industries and fields through the Municipal Safety Supervision Bureau, so that one by one “the price of blood” to tell the lesson of safe production, hoping that business owners and workers can use this as a guide to enhance their awareness of prevention and Protection capabilities prevent similar accidents from happening again, leaving production operations away from blood and death.

Blindly rescues poisonous gas causing two deaths and one injury

Case playback:

At 9:40 on January 5th, a technical person in charge of a physical processing plant discovered that the exhaust gas treatment device motor in the plant had failed during the production process, which had seriously affected the operation of the production line and required immediate repair. He opened the tunnel and entered the area to repair equipment. A strong stench whistled. It was too late for him to cover his nose.

Seeing that the situation collapsed, the worker Huang immediately rushed into the maintenance area and was also attacked by poison gas. The worker Wang saw the two fall to the ground and he rushed in without thinking. As soon as he entered the area, Wang obviously felt he had trouble breathing. His mouth was full of nausea. He realized that the poisonous gas was very heavy. He immediately ran back and forth, but he fell to the ground without a few steps.

The driver of the plant, Xue Mou, saw three people fall to the ground one after another. He took a rag and held his nose and mouth. He held his breath and dragged out three people one by one from the area. "When they were rescued, the three people had already faced a purple face." Xue Mou recalled the scene at the time.

In the end, the status of a certain, Hwang died after being rescued, Wang was cured and discharged.

survey:

As a result of the failure of the exhaust gas treatment device, a large amount of toxic gas accumulates in the narrow area, and the worker does not wear the necessary safety protection devices and emergency rescue equipment, and has rushed in, resulting in acute poisoning. This is the responsibility of the production safety responsibility accident. direct cause. In addition, workers Huang and Wang lacked knowledge of ambulances and did not take effective personal protective measures to save people, leading to further expansion of the accident, eventually killing two people and causing one person to become poisoned and coma.

According to the investigation of the accident investigation team, in addition to the above reasons, several workers were not trained in safety knowledge, their awareness of safety in production was weak, they lacked awareness of the dangers of entering limited space operations, caused accidents, and rescued blindly after the accident, resulting in accidents. expand.

In addition, the processing plant was engaged in aluminum oxidation (pickling) processing in an over-range manner, and the on-site safety production management was not in place, and operators were not informed in a timely manner of dangers in the area, safety operation regulations, accident prevention measures, emergency measures, and proper use of protective articles. Matters need to be highly valued in the future work.

According to reports, there are a total of 199 pickling enterprises in the city. These enterprises have not been approved by environmental protection agencies, and have no pollution prevention facilities, direct discharge of waste gas and waste water, have a significant impact on the environment, and have become typical industrial pollution problems.

The accident investigation team suggested that related departments should rectify these polluting enterprises as soon as possible.

Improper wear into the lathe

Case playback:

At 17 o'clock on the 22nd of February 22nd, Zhou Yi, an employee of Haoyi Auto Parts Manufacturing Company, was working in the lathe processing workshop. Suddenly there was a loud bang from the right side behind him, accompanied by a piercing scream. sound. Zhou immediately looked back and saw only the jacket of the coworker Yu Mou was hooked by the fast-turning lathe turntable. The whole person was thrown on the wall inside the lathe and slowly rolled down. There was a piece of blood on the wall.

Zhou was frightened by this scene and was stunned. After a few seconds of delay, he calmed himself down. He immediately threw away the work at hand, turned off the power of the lathe, and called the company's principal together to move Yu Mou from the inner wall of the lathe. Lift it out. At this time, Yu Mou was already dying and unconscious, and blood was constantly spilling from the back of his head.

Yu Mou was rushed to the hospital and was rescued. He died at 19:00 on the same day.

survey:

The lathe operator Ms. Yu violated the regulations. During the work period, the work clothes were not fastened. When the chucks were adjusted and the measuring workpieces were calibrated, the lathe power was not turned off, and the protective plate was directly removed so that the clothes corner was hooked by the turntable. An accident occurred. In addition, the installation of electrical wiring at the production site of the unit was not standardized, and the grounding protection device and leakage protection device were not installed on the stamping equipment, and the simple exhaust fan was used in violation.

Although the company's principal Lee has passed the company's responsible person safety production certification training, but did not organize employees to carry out safety training, did not develop safety management system and the establishment of safety management ledger, did not develop post safety operation procedures.

It is understood that in the past few years in our city, company employees suffered injuries and death due to improper wearing of uniforms. The accident investigation team stated that it may be a trivial matter to properly wear uniforms in the eyes of people. It can be seen from the case that it is a life-critical event that cannot be ignored at all times. Some enterprises in our city have clear regulations on the wearing of employees. Employees must strictly abide by and provide a safe “umbrella” for themselves. In addition, the company must establish and improve the safety production management system and safety technical operating procedures for each type of work, and earnestly implement it, implement it strictly, carry out employee safety production education and training, and improve employees' safety production knowledge and self-prevention ability.

Operation accidentally fell into the device

Case playback:

At 7 o'clock on the morning of March 12th, Wu Mou, the director of the workshop of a paper mill, conducted daily inspections of the workshop and found that the polyester network of the flowing operation was offset. He immediately sought a flashlight and adjusted the middle part between the drum and the dryer.

Due to the unclear location of the adjustment, Wu Wuyi step by step slowly close to the polyester network, trying to find out the adjustment point. Who knows accidentally stepped into the polyester net, the entire person was brought into the roller by the dryer, suddenly blood DC. A few minutes later, the papermaker found that the machine was abnormal and could not operate normally. He immediately stopped the machine and discovered that Wu was caught between the two drying cylinders. His mouth and nose were bleeding and people had fainted.

The papermakers cut the polyester net decisively and lifted Wu and called the emergency phone. Sent to the hospital, Wu eventually died of injuries due to heavy injuries.

survey:

Wu, as the person in charge of the papermaking workshop, had no awareness of safety production. There was no downtime in the process of adjusting the paper machine, causing a tragedy. In addition, the absence of protective rails on both sides of the drying cylinder is also a direct cause of the accident.

The accident investigation team stated that the paper mill only pays attention to production and management, and does not urge employees to strictly implement the company's production safety rules and regulations and operating procedures, and no safety warning signs have been set up at the corresponding locations. The plant should establish and improve the safety production management system and safety technical operating procedures for each type of work and strictly enforce it, carry out employees' safety production education and training, and improve employees' safety production knowledge and self-prevention ability. In the workshop, there are dangerous areas around the tiger's mouth, drying cylinders, etc. Protective railings should be installed. In many cases, a company's negligence may result in the loss of employees' lives.

According to Dai Xiaobo, a member of the accident investigation team, summarizing safety incidents for many years, employees' awareness of safety production is not strong, illegal operation is the biggest cause of safety accidents in various industries and fields, and 10 accidents are 9 violations. I hope that companies can use this as a violation. The book attracted attention.

No certificate

Falling steel shed loses life

Case playback:

On February 18th, the old color steel shed of Taoshan Machinery Co., Ltd. was demolished. The construction workers Bai and Chen were respectively dismantled on both sides of the color steel shed about 7 meters high. At about 16 o'clock, Chen, who was standing on the left and heard the sound of the explosion of the color steel shed and a scream of "ah," had already lost sight of Bai. He quickly looked down from the steel shed and discovered that Bai was lying on the ground, and the back of the head continued to have blood flow and no response.

Chen anxiously shouted for help: "Help, ah, someone was injured!" Surrounded by passers-by heard the sound came over to help, everyone together will Baimou sent to the Taoshan Central Hospital for treatment. Eventually, Bai was exhausted because of his injuries.

survey:

The color steel shed was built in 2005. After several years of wind and rain, the beams were rotted and could not support one's weight. In addition, the worker Bai did not qualify for the special operation, and violated the regulations, and did not work during construction. Wear safety belts and hard hats.

The accident investigation team analyzed that the company lacked the necessary conditions for safe production, the construction site lacked inspection and supervision, and did not provide the necessary labor protection supplies; it also contracted the color steel shed refurbishment business to individuals without corresponding dismantling qualifications, and should immediately stop illegal construction. behavior.

Dai Xiaobo said that many times the occurrence of dangerous conditions is caused by the fact that companies and employees do not understand legal knowledge. Just as the company, once seriously studying and strictly abide by the "People's Republic of China Safe Production Act," will build business contracted to units or individuals with safe production conditions and corresponding qualifications, signed a safety production management agreement, and the contractor's safe production If the work is coordinated and managed, such events will not occur.

In recent years, unlicensed posts accounted for 2% of all safety accidents.