Line pipe specification: 8-1240×1-200mm Line Pipeline Standard: API SPEC 5L Uses: Used for gas, water and oil transportation in the oil and gas industry API SPEC 5L-2011 (Line Pipe Specification), compiled and published by the American Petroleum Institute, is used worldwide. Line pipe: It is the oil, gas or water that is pumped out of the ground and transported to the oil and gas industry enterprises through pipelines. The line pipe includes two kinds of seamless and welded pipes, and the pipe ends have flat ends, threaded ends and socket ends; the connection modes are end welding, coupling connection, socket connection and the like. The main material of the tube is steel grades such as B, X42, X46, X56, X65 and X70. LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.