Many people in the industry jointly "draft": super practical decoration process table


China board trading network news:

They say that the spring decoration is good, and that it has recently begun to be renovated.

The first time the owner didn't know what steps to decorate and what to prepare? Don't worry, Huashang Daily reporter interviewed the head of the engineering department of decoration companies, urban people, Fengguang unlimited, Julong and other decoration companies, summed up a summary for you Super practical decoration flow chart.

Super practical decoration table

● 1. Standing tools: tape measure, calculator, notebook, camera phone

For home decoration, several tools must be prepared and may be used at any time. Tape measure (measurement of wall and material size at any time), calculator (use as a budget to buy materials), notebook (bookkeeping, records need to buy materials and other precautions), camera-enabled mobile phones (anytime and designer, The foreman and the workers communicate, the project site and the materials and furniture to be purchased sometimes need to take pictures)

●2. Check the dimensions again before starting work

Before starting work, it's best to measure the corners of the house in person, take notes, mark clearly, don't be lazy, and certainly useful. Clearly the area involved in the renovation process, especially the tiling area, wall paint area, wallpaper area, floor area; clear main wall size, especially the need to design the wall size of the furniture.

● 3. Buy the wooden door when the main body is changed

Main body demolition and reform mainly includes demolition of walls, masonry walls, shovel wall coverings, demolition of heating, replacement of plastic steel windows, and so on. After the demolition of the completed garbage, it must be cleared up in time to ensure the cleanliness of the interior, but also to facilitate the construction. At this point, the purchase of wooden doors, it is best to put the cabinet, hood, stove, water heater together to be determined.

●4. Confirm the cabinets and water heaters before the hydropower reform

Hydroelectric reforms are buried in walls and cannot be changed at any time. So be sure to determine the exact location of switches, lamps, basins, bathtubs, and washing machines. Before the hydropower reform, the cabinet designer should come to the door to make the first measurement and help you determine the power and waterway reconstruction plan. Water heaters, it is also best to send someone to design the location of the power supply and the interface according to the model you have determined. On the wall below the basin, it is best to leave a power outlet to facilitate the installation of water purifiers, kitchen treasures, etc.

● 5. The kitchen bag is the most solid and easy to use the red brick

Considering the moisture-prone and wet environment of the kitchen and toilet, the material of the standpipe must not be wood keel, even if the wooden keel is not painted with anti-corrosion paint. Remember, the standpipe is made of light steel keel or red brick. Light steel keel provinces, but the most solid and easy to use is the red brick. It is advisable to order furniture at this time.

●6. Buy a good floor drain before tiling

Before tiling, you must buy a floor drain and buy a deodorant function. After waterproofing and brushing, prepare a tiling.

When tiles are tiled, the excess adhesive material in the gaps in the tiles should be removed in time to clean them. Wipe away dirt from the tile surface with a damp cloth. Do not wait until the bonding material is dry before cleaning and wiping. It must not be cleaned. It will also cause damage to the glazed surface of the tile surface. It is advisable to order water basins and faucets at this time, and the cabinet designer will visit the door for the second time.

● 7. The oil painter used to paint the wall to color lighter than the color card

Any carpentry, even if it is a mouthwash, must follow this procedure. The big core board sinks, the veneer is veneered and then painted. When mixing oil, it is absolutely wrong to brush the oil directly on the big core board. It will take a long time before it will crack.

If the walls are to be painted, the color must be noticed. The color to be drawn out is lighter than the color card. It must not be the same as the color card or deeper than it is because at least 2 times of paint is applied to the wall, and some of them are still 3 times. The color of the wall will be deeper than the one layer.

● 8. Do not open the window for ventilation within 48 hours after wallpapering

After the wall paint brush is applied, the oil trader can apply nitro-lacquer to the place where the wallpaper is to be applied. The paint can be dried the next day, and then the master can paste the wallpaper. Do not open the window for ventilation within 48 hours after the wallpaper has been posted. Let it dry slowly. If there is a warping in an individual place, repair it in time. It is recommended to buy the panels, sockets and lamps at this time.

● 9. The best outlet to buy a switch

Sockets are best bought with switch function, so rice cookers, microwave ovens can be removed from the power plug. But some five-hole power supply with switch, three-phase socket is flat mouth, once your appliance needs is a round mouth three-phase, it will be very depressing. Therefore, multi-use sockets must also be bought. At this time the bathroom kitchen ceiling, Yuba should be in place.

●10. Kitchen ceiling best buy aluminum buckle plate

It is best to buy aluminum buckle ceiling, even if it is removed after many years, selling scrap aluminum is worth a lot of money. On the other hand, the PVC buckle plate looks good, but the quality and performance are general, and the plastic thing is not worth even if it is sold. Buy buckle board, to ask the price of all-inclusive, do not buckle board, corner to buy. But the installation fee is another calculation.

●11. Multi-party installation cabinet

Cabinets are a cooperating project and should be ordered in advance about hoods, stoves and sinks. It is best to send them together on the same day. It is advisable to talk to the cabinet makers in advance and bring the artificial stone countertops with the cut-off appliances and sinks together. Perhaps they can be reused.

●12. First install the hardware, sanitary ware, and then install the wooden door and floor

It is recommended that before the wooden doors and floors are installed, the items such as drying racks, curtain rods, lamps, sanitary ware, and bathroom hardware will be provided in advance. Then, first install the wooden door and then install the floor, mainly because of the complex installation steps, hinges, door locks, door stoppers, door frames, and so on. There are many tools used, such as installing the floor first, and the bumping is difficult to avoid.

●13. Wasteland cleaning more detailed as possible

The biggest manifestation of cleaning is to wipe glass, followed by waxing the floor, wax to buy their own, cheap and easy to use, but must use a cleaning waxing machine, the efficiency of tens of people, hundreds of times. After the cleaners have gone, it's best to do a thorough cleaning again. Use a towel from the mouth to the door, from the tiles to the corners, wipe one house and one house. Don't be lazy.

●14.Furniture protection should be done when furniture and appliances enter the market

From the renovation of the rough room to the new home, the furniture is the first. Beds, mattresses, wardrobes, shoe cabinets, sofas, dining tables, etc. Before entering the market, furniture should be ready for the following items: disposable shoe covers (do not buy poor quality, step on the break), a few boxes of activated carbon, ladders, floor protection film (carrying wardrobes, TV cabinets and other best to the floor to be protection).

●15. Do not spend too much money on accessories for curtains

With the decorative ornamentation and beautiful curtains, the warm taste of the home comes out. Do not spend too much money on accessories, curtains, lead sinkers, lace, fabric buttons, and tassels. These eight yuan and ten yuan must cost twenty or thirty yuan per meter. It is not necessary, but also Not necessarily look good. Of course, there are some other accessories, small decorations, green plants and so on. At this point, a new home is completely set. Of course, after the new home is installed, remember to open the window for at least 3-6 months before checking in on the air.

The above information, relevant Baoyuan plate supply information, plate purchase, etc. Please pay attention to the Chinese plate trading network


Apply to:Nordberg HP Cone Crushe, Nordberg fixed cone liner,HP100, HP200,HP300, HP400,HP500,HP700,HP800,HP4,HP5,HP6
Main material: high manganese steel, chrome-manganese (Mn13, Mn13Cr2, Mn18, Mn18Cr2), Carbide
Casting Process: water glass sand casting and lost foam casting process
Adapt materials: river gravel, granite, basalt, iron ore, limestone, quartz, diabase, iron ore, gold, copper, etc.
Applications: quarry gravel, concrete mixing station, dry mortar, desulfurization plant, quartz sand.

Nordberg Hp Cone Crusher Parts

Mining Crusher Spare Parts,Nordberg Hp Cone Crusher Parts,Nordberg Cone Crusher Parts,Nordberg Hp Crusher Parts

Ma An Shan Shi Bo Da Jing Shen Machinery Co.,ltd , https://www.bodamachinery.com