SKF double row roller bearing features and its usefulness

Home>Bearing knowledge>SKF double row roller bearing features and its use
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

SKF double row roller bearing features and its usefulness

Source: China Bearing Network Time: 2013-10-14

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
SKF thrust roller bearings are mainly characterized by the following aspects: axial and radial combined loads for axial loads; but radial loads must not exceed 55% of axial loads. Compared with other thrust roller bearings Such SKF bearing has a lower collision factor; higher speed; and has a self-aligning function. The stick of the 29000 type bearing is an asymmetrical spherical roller; it can reduce the relative sliding of the roller and the raceway during operation; Large length, large diameter; large number of rollers; high load capacity; generally oil smooth; single low speed condition can be used for smooth grease. When drawing and selecting; should be preferred, 80,000 type thrust cylindrical roller bearing, 90000 type thrust cone rolling Sub-bearings and AXK thrust needle bearings; capable of accepting one-way axial loads; it is much larger than the axial load of thrust ball bearings; and it has high rigidity and small axial space. Thrust cylindrical roller bearings And thrust needle roller SKF bearings are suitable for low speed applications; thrust tapered roller bearings rotate slightly faster than thrust cylindrical roller SKF bearings. Detailed classification and type control:
1. Thrust cylindrical roller bearing (80000 type)
Note: It can accept large one-way axial load; restrain one-way axial displacement; low limit speed 2, thrust spherical roller SKF bearing (29000 type)
Note: For radial and axial combined loads that are mainly subjected to axial loads; radial loads must not exceed 55% of axial loads; one-way axial loads can be accepted; axial displacement of one direction of constrained shafts (shells) , thrust needle roller and cage assembly (AXK type)
Note: Suitable for low speed applications
Recommend to friends comments close window

Bearing related knowledge
Skill analysis: device method and specification of bearing
FAG bearing data high-speed bearing grease bearing "quality misunderstanding" unique 胪 Chen joint bearing features (a)


This article links to http://
Please indicate the bearing network http://

Previous:Methods for making rolling bearings DD ferrule forming method Next: What are the common quality defects of bearing parts after heat treatment?

LED Flood Light

LED Flood lights always for flood lights to light a wide or narrow place, like a tree, figure, building frame, landscape lighting, stadium lighgting, etc. As a outdoor led lighting, the flood light is waterproof. Floodlight run on 12V, 24V, 110V-220V, and the dmx led flood light can control by standard dmx LED Controller, like sunlite, madrix, etc. The flood lights panel can be rectangle, square, round, two head flood lights.The output wattage from 9W led flood light, 18W led flood light, 30W led flood light, 36W led flood light, upto 72W led flood light, 144W led flood light.


Photo show of LED Flood light:

LED Flood Light 01

Flood Light (2)

Led Flood Light,Flood Lights,24V Led Flood Lights,Waterproof Led Flood Light

Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com