The floor industry has new opportunities for policy adjustment

The floor industry has new opportunities for policy adjustment With the recovery of the real estate market this year, coupled with the improvement of consumer living standards and the further release of market demand, floor companies have obviously more room to expand this year. Flooring companies can respond to changes and adjust their product structure and market layout in order to seek better development.

New Opportunities under Policy Regulation In recent years, after the country has successively introduced a series of control policies to curb housing prices and crack down on real estate speculation, the once-hot property market has suddenly cooled down, which has caused certain negative impact on the flooring industry. Many people in the flooring industry are more inclined to "short-term negative long-term good" point of view, that the floor and the entire household industry will be a potential benefit of the new round of real estate regulation.

At present, the regulation and control of the domestic property market has gradually stabilized and economic stimulus policies have been introduced. For the development trend of the floor market in the next two years, people in the industry believe that there will be steady growth in demand, small fluctuations in prices, and the overall trend of steady growth. In order to achieve leap-forward development, floor companies must have their own rules of response and use the power and capability of pioneering and innovation to adjust business strategies and market behavior to adapt to the characteristics of market competition under the new situation and realize sustainable development in the new situation. development of.

The industry believes that the downturn in the property market will not directly affect the demand of the flooring market. This impact is not only small, but will be limited to the short term and will not last long, so the rigid demand of the flooring industry will not decrease. The state has introduced a series of policies to regulate and control the real estate industry, which is not necessarily a good thing for the flooring industry. Flooring companies should continue to innovate their marketing models and service models, and enhance their overall competitiveness and ability to withstand market risks through a rich product line and low-carbon and environmentally friendly development model.

The prospects for the rural market are promising. With the country’s increasing emphasis on the rural market and the increasing demand of rural consumers for home building materials, many businesses are beginning to realize that the rural market has gradually become a “new continent” in the market, and with rural areas With the continuous improvement of the market, the demand for flooring products in the rural market will increase, and the rural areas have gradually become the key development direction of the building materials industry.

The flooring industry, as one of the more active parts of the home building materials market, has also increased its share of the policy in the rural market. In the short term, high-end flooring products also appear to be extravagant in rural areas. In contrast, the low-to-medium floorboard market will be buoyant in rural areas. In this case, the development potential of floor companies, especially small and medium-sized floor companies, is even greater.

Threaded Fittings

China Threaded Fittings,Pipe Threaded Fittings supplier & manufacturer,

Size: 1/2''~6''

Class Rating: 3000~6000

Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)

TG(tongue and groove face);MFM(male and female face)

Manufacturing process: Push, Press, Forge, Cast, etc.

Material:

Carbon steel:

ASTM A105;

ASTM A266 GR.1,GR.2,GR.3,GR.4

Stainless steel:

304/SUS304/UNS S30400/1.4301

304L/UNS S30403/1.4306;

304H/UNS S30409/1.4948;

309S/UNS S30908/1.4833

309H/UNS S30909;

310S/UNS S31008/1.4845;

310H/UNS S31009;

316/UNS S31600/1.4401;

316Ti/UNS S31635/1.4571;

316H/UNS S31609/1.4436;

316L/UNS S31603/1.4404;

316LN/UNS S31653;

317/UNS S31700;

317L/UNS S31703/1.4438;

321/UNS S32100/1.4541;

321H/UNS S32109;

347/UNS S34700/1.4550;

347H/UNS S34709/1.4912;

348/UNS S34800;

Alloy steel:

ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;

ASTM A182 F5a/F5/F9/F11/F12/F22/F91;

ASTM A350 LF1/LF2/LF3;

Duplex steel:

ASTM A182 F51/S31803/1.4462;

ASTM A182 F53/S2507/S32750/1.4401;

ASTM A182 F55/S32760/1.4501/Zeron 100;

2205/F60/S32205;

ASTM A182 F44/S31254/254SMO/1.4547;

17-4PH/S17400/1.4542/SUS630/AISI630;

F904L/NO8904/1.4539;

725LN/310MoLN/S31050/1.4466

253MA/S30815/1.4835;

Nickel alloy steel:

Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;

Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;

Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;

Alloy K-500/Monel K-500/NO5500/2.475;

Alloy 600/Inconel 600/NO6600/NS333/2.4816;

Alloy 601/Inconel 601/NO6001/2.4851;

Alloy 625/Inconel 625/NO6625/NS336/2.4856;

Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;

Alloy 800/Incoloy 800/NO8800/1.4876;

Alloy 800H/Incoloy 800H/NO8810/1.4958;

Alloy 800HT/Incoloy 800HT/NO8811/1.4959;

Alloy 825/Incoloy 825/NO8825/2.4858/NS142;

Alloy 925/Incoloy 925/NO9925;

Hastelloy C/Alloy C/NO6003/2.4869/NS333;

Alloy C-276/Hastelloy C-276/N10276/2.4819;

Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;

Alloy C-22/Hastelloy C-22/NO6022/2.4602;

Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;

Alloy B/Hastelloy B/NS321/N10001;

Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;

Alloy B-3/Hastelloy B-3/N10675/2.4600;

Alloy X/Hastelloy X/NO6002/2.4665;

Alloy G-30/Hastelloy G-30/NO6030/2.4603;

Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;

Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;

Alloy 31/NO8031/1.4562;

Alloy 901/NO9901/1.4898;

Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;

Inconel 783/UNS R30783;

NAS 254NM/NO8367;

Monel 30C

Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952

Nimonic 263/NO7263

Nimonic 90/UNS NO7090;

Incoloy 907/GH907;

Nitronic 60/Alloy 218/UNS S21800


SALES@GHSAILINGPIPE.COM



A threaded pipe is a pipe with a thread. They are often used in water gas pipes, small diameter water pipes, compressed air pipes and low pressure steam pipes. The pipe is connected to the pipe end with the thread. The thread can be coated with suitable adhesive (such as thick white paint, lead oxide glycerin adhesive, etc.) to ensure sealing.

There are mainly internal teeth, external teeth, live tube, elbow (elbow), three way pipe, four way pipe (crosshead) and reducer.Manufacturing standards:

GB/T 14383, ASME B16.11, BS 3799, MSS SP 83

Threaded Fittings,Pipe Threaded Fittings,Steel Threaded Fittings,Forged Threaded Fittings

HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com