Tips: What are the tips for using seat belts?

Personal safety protection equipment used by on-site construction personnel generally includes: safety helmets, safety belts, protective clothing, protective glasses, protective shoes, and gloves. These safety articles need to be properly used and worn, as well as simple maintenance, maintenance, and inspection knowledge. The use and inspection of commonly used security products is very important to ensure the safety of construction personnel during the labor process. Because it is commonly used, people often disregard it, and it is easy to ignore its role. In particular, strict requirements for use are not kept in mind, and it is easy to cause vicious accidents.

Electric power construction site, high work, overlap and crossover operations are numerous. In order to prevent the operator from falling down at a certain height and position, the operator must fasten the seat belt when he is working at a height or height. The use and maintenance of seat belts have the following requirements:

In thinking, we must attach importance to the role of seat belts. Numerous cases have demonstrated that seat belts are "life-saving belts." However, there are a few people who are in trouble with the seat belts. It is inconvenient to walk up and down, especially for some small livelihoods and temporary activities. It is considered that “there is time for the safety of the belts”. As everyone knows, the accident occurred in a moment, so high-level operations must be required to fasten the seat belt.

Before using the seatbelt, check that the rope has no deterioration, if there is any crack in the retaining ring, and if the circlip is good.

Work at heights, such as seat belts, has no fixed hangers, and appropriate strength wire ropes or other methods should be used. It is forbidden to hang the belt on a moving or sharp corner or loose object.

Hanging low use. Hanging a seat belt high, people working underneath is called high hanging. This is a relatively safe and scientific method of hanging. It can reduce the actual impact distance when a crash occurs. In contrast with the low hanging high. It is the safety belt hanging in the low place and the person working on it. This is a very unsafe tying method, because when the fall occurs, the actual impact distance will increase, and both the person and the rope will be subject to a greater impact load. Therefore, the safety belt must be used in the same way as it is to keep it low.

The safety belt should be hung on a firm member or object. To avoid swinging or colliding, the rope should not be knotted and the hook should be hung on the connecting ring.

Seat belt protection sleeve should be kept intact to prevent rope wear. If it is found that the protective sleeve is damaged or peeled off, it must be used after adding a new one.

It is strictly prohibited to use the seat belt without authorization. If a long rope with a length of 3m or more is used, a buffer must be added and all parts must not be removed.

Before using the seat belt, check whether all parts are intact. Safety belts should be maintained and kept after use. Always inspect the seat belt sewing section and the hook section, and check the rifling thread for cracks and damage.

When seat belts are not in use, they should be kept properly. Do not touch high temperatures, open flames, strong acids, strong alkalis or sharp objects, and do not store them in wet warehouses.

Seat belts shall be tested once after two years of use. Frequent use shall be subject to visual inspections. Any abnormalities must be replaced immediately. Regular seat belts or used seat belts may not be used again.