UV Resistant Outdoor Anti-corrosion Powder Coatings GENERAL TYPES Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color. PHYSICAL PROPERTIES CURING CONDITIONS 200 °C (work piece temperature), 10-15 minutes for outdoor use. AVERAGE COVERAGE 8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate) PACKING Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight. STORAGE AND TRANSPORT Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used. HEALTH AND SAFETY Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating Mechanical property Testing items Standards and methods Inspecting index Impact strength GB/T1732-1993, AS3715 2.8 >50kg/cm Bending resistance GB/T1185-88, AS1580 402.1, ISO9227 Pass 2-5 millimeters Adhesion CHECKED TEST GB/T9286-88,2mm Cross cut, ISO2409 Pass100/100, passes 0 levels Cupdrawing:Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters Pencil hardness GB/T6739-86, Mitsubishi Pass H-2H Chemical resistance and weather resistance Salt spray test GB/T1771-91,500 hours The cross section of corrosion less than 2MM Hot and damp resistance test GB/T17740-79(89),1000 hours Without air bubbles, loses the light slightly Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage Heat resistance 200degree,1 hour The color change is lower than E=1.5 Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage Uvioresistant QUV-313,500 hours Gloss higher than 80% lower than the Munsell color change level Water tolerance of 2 hours No bubble, not falling, losing light We offer free samples to you. You can contact me informatoin as follows, UV Resistant Outdoor Anti-corrosion Powder Coatings GENERAL TYPES Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color. PHYSICAL PROPERTIES CURING CONDITIONS 200 °C (work piece temperature), 10-15 minutes for outdoor use. AVERAGE COVERAGE 8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate) PACKING Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight. STORAGE AND TRANSPORT Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used. HEALTH AND SAFETY Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating Mechanical property Testing items Standards and methods Inspecting index Impact strength GB/T1732-1993, AS3715 2.8 >50kg/cm Bending resistance GB/T1185-88, AS1580 402.1, ISO9227 Pass 2-5 millimeters Adhesion CHECKED TEST GB/T9286-88,2mm Cross cut, ISO2409 Pass100/100, passes 0 levels Cupdrawing:Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters Pencil hardness GB/T6739-86, Mitsubishi Pass H-2H Chemical resistance and weather resistance Salt spray test GB/T1771-91,500 hours The cross section of corrosion less than 2MM Hot and damp resistance test GB/T17740-79(89),1000 hours Without air bubbles, loses the light slightly Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage Heat resistance 200degree,1 hour The color change is lower than E=1.5 Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage Uvioresistant QUV-313,500 hours Gloss higher than 80% lower than the Munsell color change level Water tolerance of 2 hours No bubble, not falling, losing light We offer free samples to you. You can contact me informatoin as follows,
Attn:Danae
Â
Attn:Danae
Â
UV Resistant Outdoor Anti-Corrosion Powder Coatings
Model NO.: FH-040
Level: Finish Coat
Certification: ISO14001, RoHS, ISO9001
Substrate: Steel, Iron, Copper and Other Metals
Expiration Date: 1 year
Formation Mechanism: N/a
Packaging: Carton
Color on Basis: Ral or Pantone Chart
Gloss: Glossy, Semi Glossy or Matt
Finish: Smooth or Texture
Mark: Neutrial or Designed by Customer
Gun: Electrostatic or Tribo
Certificate: ISO, RoHS and SGS
Factory: We Have Our Own Powder Coating Factory
Application: Shelf, Fence, Fan, Security Door and Others
Annual Export Quantity: 3, 000 Tons
1 Container: 19 Tons
Trademark: EV
Transport Package: 25kgs/Carton
Specification: RAL colors or Pantone colors
Origin: China
HS Code: 1111111
Model NO.: FH-040
Level: Finish Coat
Certification: ISO14001, RoHS, ISO9001
Substrate: Steel, Iron, Copper and Other Metals
Expiration Date: 1 year
Formation Mechanism: N/a
Packaging: Carton
Color on Basis: Ral or Pantone Chart
Gloss: Glossy, Semi Glossy or Matt
Finish: Smooth or Texture
Mark: Neutrial or Designed by Customer
Gun: Electrostatic or Tribo
Certificate: ISO, RoHS and SGS
Factory: We Have Our Own Powder Coating Factory
Application: Shelf, Fence, Fan, Security Door and Others
Annual Export Quantity: 3, 000 Tons
1 Container: 19 Tons
Trademark: EV
Transport Package: 25kgs/Carton
Specification: RAL colors or Pantone colors
Origin: China
HS Code: 1111111