Pneumatic tools are very unique to most people. These hardware tools are indispensable for industrial production and maintenance work, and are very convenient to use. Pneumatic tool maintenance techniques need to be paid more attention by the users, which is also necessary to understand the use of pneumatic tools. So, what are the maintenance tools for pneumatic tools? Methods and techniques for using and maintaining pneumatic tools: Ensure the correct generation of gas supply system: the inlet pressure at the tool inlet (non-air compressor outlet pressure) is generally 90PSIG (6.2Kg / cm ^ 2), too high, too low damage the performance and life of the tool. The air intake must contain sufficient lubricating oil so that the air motor in the tool is fully lubricated (a white paper can be placed on the tool exhaust to check for oil stains, which is normal for oil stains). • The air intake must be free of moisture. If the air is not air-dried, it is not appropriate. ? Do not arbitrarily remove the parts of the tool and operate it. In addition to affecting the operator's safety, the tool may be damaged. If the tool is slightly faulty or cannot be used until the original function is used, it can no longer be used. Check it immediately. Use all kinds of tools, be sure to follow the various safety regulations and instructions for use. To work with the right tools, too large a tool can cause work damage, and too small a tool can cause damage to the tool. Regularly (about once a week) inspect and maintain tools, add butter to the rotating parts such as bearings, and add oil to the air motor. Of course, in order to ensure that the pneumatic tools will not be damaged during use, Xiaobian recommends that if you do not operate the pneumatic tools at all, it is best to find professional personnel for construction and use. It can be seen that the use of pneumatic tools is a headache for them, and the performance and potential of the products are introduced to each other to ensure the correct application of hardware products. Therefore, the procurement personnel need to grasp the information of the product, the performance of this product can be fully exerted, and the product is lost prematurely. Editor in charge: Wang Zhen Temporary Fence,Construction Site Fence Panels,Outdoor Fence Temporary Fence,Outdoor Temporary Fence Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.xinlongfence.com