In order to reduce budgetary expenses, many people decided to start the wallpapering project at home. However, due to lack of early homework, the wallpaper was always unsatisfactory, affecting the interior appearance. So, what are the steps for wallpapering ? Let's let Xiaobian introduce the steps for wallpapering ! Wallpapering steps 1. First determine the size of the wallpaper First of all, we must first clarify the size and size of a good wallpaper. After it is clear, we can tailor the wallpaper according to the texture and area of ​​the wallpaper. 2. The wall is clean After clarifying the size of a good wallpaper, the next step is to Remove stickies or paint and other dirt on the wall, and at the same time, if the wall is concave and convex, it must be quickly repaired. It should be noted that if there is fabric or waste wire on the wallpaper, it must be cleaned in advance. Clean, otherwise it is easy to poke wallpaper when posting. In addition, we must do a good job of sanding, so that the wall surface can be more even, more convenient to post, while the wallpaper will be more beautiful after affixing. 3. Trimming wallpaper (1) We need to pay attention to the symmetry of the wallpaper when we cut the wallpaper, and we must also plan for the wallpaper. The effect of this paste will be more beautiful. (2) If multiple wallpapers are used, the number of wallpapers must be numbered. (3) At the same time, after the wallpaper is cut, it must be soaked in water for more than 10 minutes before it can be brushed. 4 first brush the bottom of the film after the putty Initially on the wall we had to apply a layer of base film, which was almost the same thickness. After we had finished the application of the base film, we put a scrape on it and polished it, just like the previous work of brush painting. Work, this is to make the wall more smooth and smooth, to prevent the walls absorb the glue of the wallpaper, so that the wallpaper is firmly posted on the wall. 5. Brushing treatment In the technology of brushing glue, we should pay attention to symmetry, don't start the pile, and at the same time we must prevent dirt on the wallpaper. After brushing, we must fold the glued plastic surface and place it for 3 minutes to prevent it from drying. Too fast to affect use. The width should be wider than the wallpaper when brushing the walls. Reserve some places. 6. Crop the wallpaper The first is to cut the wallpaper, but at this time it is necessary to trim the pasted wallpaper. Before the wallpaper can be cut, the scale must be good. At the same time, to maintain the symmetry of the wallpaper when cutting, so as to be more beautiful. 7. The last step - stick wallpaper The last step is to paste the cut wallpaper. The above is all about what steps the wallpaper has to offer. I hope it will help everyone. If you want to know more relevant knowledge, you can continue to pay attention to the relevant information of this website. Xiao Bian will bring more exciting content for everyone. Single Eyelet,Eyelets Prym,Prym Grommets,Washer Eyelet NINGBO ZONGLAN MECHANICAL AND ELECTRICAL EQUIPMENT MANUFACTURE CO., LTD , https://www.zonglaneyelet.com
