Solid wood furniture refers to furniture made of natural wood, and the texture of the wood can generally be seen on the surface of the furniture. At present, there are roughly two types of solid wood furniture on the market, one is pure solid wood furniture, all the materials of this furniture are solid wood; the other is imitation solid wood furniture, which is the natural texture, feel and color of wood It is the same as solid wood furniture, but it is actually a combination of solid wood and artificial board. Why isn't solid wood furniture all solid wood, how solid is the solid wood furniture? How should consumers choose?   Industry unspoken rules Liucheng solid wood is also solid wood furniture  According to relevant sources, taking an ordinary wardrobe as an example, the materials of the panel and the back panel are different, and the side panel and the bottom panel often do not use the same material. It is normal for a wardrobe to use six or seven types of wood. As long as the solid wood material exceeds 30%, some businesses will sell under the sign of "solid wood furniture". For example, cabinets and wardrobes, as long as the door panels are solid wood, are called solid wood cabinets and solid wood wardrobes, especially furniture, as long as the table legs and armrests are solid wood, they are also marked as solid wood. However, this is marked as "solid wood", but in fact only some solid wood furniture, the price can reach more than several times the cost.  "Liucheng solid wood said" is indeed the "unspoken rule" recognized by the furniture industry. According to industry insiders, there are two types of "solid wood furniture" currently on the market: one is 100% solid wood furniture, and the other is "standard solid wood furniture", that is, about 60% of the furniture is made of solid wood The remaining 40% is made of composite materials such as composite and reinforced, and most of this solid wood furniture is made of solid wood, all solid wood, environmentally friendly solid wood, pure wood, raw wood, etc. Responsible shop assistants will truthfully inform the materials and ingredients used in the furniture, and some thieves and slippery merchants not only do not actively inform, but also cover up, invisibly expand the scope of solid wood, in terms of price and quality. Infringe on consumers' right to know.  Consumers are advised to purchase fully solid wood furniture without wood-based panel materials. They must confirm with the sales staff at the time of purchase and indicate "100% solid wood" in the contract.  The new national standard requires solid wood to exceed 70% to be called solid wood furniture  Since May 1, 2009, the new version of "General Technical Conditions for Wooden Furniture" was officially implemented, and for the first time, "solid wood furniture", "artificial board furniture", "integrated wood furniture", "all solid wood furniture", " Specific definitions of "solid wood furniture" and "solid wood veneer furniture". According to the "General Technical Conditions for Wooden Furniture" issued by the General Administration of Quality Supervision, Inspection and Quarantine and the National Standardization Management Committee, furniture components must meet the solid wood standard of more than 70% to be called solid wood furniture. Some businesses mentioned "pure solid wood furniture", "raw wood furniture", and "environmental solid wood furniture", which are not mentioned in the national standards. Although they are not standardized, consumers need to pay special attention to the word games.  According to the compulsory standard GB5296.6-2004 "Instructions for the Use of Consumer Products Part 6: Furniture" issued by the State in 2001, the solid wood furniture products sold must have instructions for use, and the furniture name must reflect the true attributes and meet the corresponding national standards or industries The standard stipulates that the instructions for use must explain the relevant national requirements and indicators, as well as the control indicators such as the toxic substances or radioactivity contained in the materials used in the furniture and the paint, etc.  If the merchant is unable to provide product usage instructions, the merchant should be required to note the wood use variety and location of the furniture in the sales contract. Consumers should be conscious of signing the contract when customizing the furniture, and refine the style of the furniture and the board in the contract. Material, specifications, quality of hardware, etc. In addition, before signing the contract, consumers are better able to consult the relevant information, or find a friend who is familiar with the situation to accompany them to ensure that they are aware of it, even if the quality problems of the furniture in the future can better protect their legal rights. (Editor: Peter)  Fiberglass Tape Measure,Tape Line Measure,Magnet Tape Measure,Abs Fiberglass Tape Measure Shangqiu Hengli Measuring Tools Co.,Ltd , https://www.henglimtools.com
What kind of furniture is considered solid wood furniture
Â