The near-suction range hood is now the darling of kitchen appliances. It has the advantages of easy scrubbing, no contact, and strong suction. So, what else do we need to pay attention to when purchasing? First of all, the near-suction type hood on the market is different from the installation height. Why is the installation height of the same hood different? The near-suction range hood has changed the traditional smoke machine design and the method of fume extraction. When cooking, the smoke has not been diffused away from the side, thus achieving the effect of removing the soot. The red-day infrared energy-concentrating stove adjusts the installation height of the hood to 30cm, because the red-day infrared oven uses a new air premixed combustion technology, and the gas is pre-mixed with the air and burned on a radiant combustion plate with 7,500 fire holes. The home-based infrared gas stove with excellent texture realizes fully pre-mixed air through specially designed burner ejector structure, fully burns on the surface of high-quality “Dongqingshi†ceramic plate, and converts heat energy into infrared radiation heat transfer, eliminating the threat to the human body. Health risks. It seems that choosing a kitchen appliance can't just look at a single product introduction, and choosing a suitable set of packages is the smart choice. Hydraulic Flange Hydraulic Flange,Flange Adaptor,Regular Hydraulic Flange,SAE Flange SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com
Hydraulic Flange fitting inculde SAE Code 61 and Code 62 Code 61 hydraulic fitting flange is intended for for pressures up to 3,000 psi. Code 62 is intended for up to 6,000 psi. Bolt hole spacing and flange fittinghead diameters are larger for the higher pressure Code 62 fittings.
The female port is an unthreaded hole with four bolt holes in a rectangular pattern around the port. The male hydraulic fitting is a flanged head, grooved for an O-ring, and either a captive flange or split flange halves with bolt holes to match the port. The seal takes place by compressing the O-ring between the flanged head and the flat surface surrounding the port. The threaded bolts hold the hydraulic connection together.