The problem of home safety has always been a matter of concern to everyone, and the balcony serves as a direct connection between the house and the outside world. Therefore, the owner of the balcony security window is considered to be an effective barrier to talent and property safety. Then, next, we will introduce the security window and how to install the anti-theft network. Which is good anti-theft window 1, aluminum alloy security window The aluminum alloy anti-theft window is made of aluminum alloy material. This material has the characteristics of high strength, high hardness, and is one of the mainstream products currently used. The core function of the aluminum alloy security window is anti-theft, and the prominent features of the security aluminum anti-theft window are anti-theft, anti-shear and tensile. 2, stainless steel security window Stainless steel anti-theft window uses high quality stainless steel, the surface is smooth, beautiful, strong, and has a good anti-theft effect. However, when selecting a large-scale manufacturer, the minimum product quality and after-sales service are guaranteed. 3, invisible anti-theft window This anti-theft window has been improved on the basis of the traditional balcony anti-theft window, and this anti-theft window not only retains the original architectural style, does not need to change the pattern, but also ensures safety, and is conducive to escape and safety. Anti-theft network installation method 1, the amount of size Measure the size of the window first, and the horizontal skeleton needs to be mounted on the outer wall outside the window, and the size should be larger than the ruler of the window. If it is a vertical skeleton, it needs to be installed on the window sill outside the window, so that it is the same size as the window sill. 2, skeleton cutting There are two upper and lower skeletons, so when cutting the skeleton, two skeletons should be opposite and the holes should be aligned. Otherwise, the steel wire is not vertical when tensioning the steel wire. 3, fixed skeleton in the wall The holes in the skeleton are now drilled, and there are self-made lines in the grooves. Each hole is spaced 10 centimeters apart on the line, and then holes are drilled in the frame and holes are drilled in the wall. However, the upper and lower frames must be aligned. 4, steel wire Insert the wire into the single locker and pull out 1 meter to 2 meters to connect to the detector. The function of this kind of single locking device is to fix the head and tail root wire, the single locking wire can only pull tight, can not pull back, the first wire in the upper right corner, the last wire may be in the upper left, it may also It is on the bottom left. 5, skeleton self-locking The skeleton self-locking can lock the skeleton cover on the skeleton groove, so that it cannot be opened. Only the wire can be cut off, the skeleton groove can be restored to the factory state, and the skeleton cover can be opened. Editor's summary: Regarding the anti-theft window which is good and anti-theft network installation method introduced here, I hope to be helpful to everyone, want to know more relevant knowledge can focus on this site information. Anti-theft window stainless steel anti-theft window invisible anti-theft window aluminum anti-theft window anti-theft window which is good Metal Tube Cutting Machine,Metal Tube Laser Cutting Machine,Pipe Fiber Laser Cutter,Metal Tube Laser Cutter Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com
