Bathroom installation master must know the shower room installation Raiders

The shower room can bring a lot of convenience to our bathroom life, but also very healthy and hygienic. Many people choose the shower room when choosing the bathtub and shower room when we buy sanitary ware. How much do you know about the installation skills of the shower room? Let's take a look at the installation of the bathroom with the small series.

1, carefully instructions, and check whether the product parts are complete

2, the shower curtain rod is generally installed at a height of about 2.06 meters from the ground (the specific situation can be determined according to personal habits, as well as the height of the bathroom). Put the shower curtain rod in the position where it needs to be installed, and try to determine the drilling position and make a mark.

3. Drill holes in the wall with a drill bit of 12 mm diameter (drilling depth is about 6 cm). When drilling, let the drill bit slightly down, and the buttocks slightly upward after the drill, which can effectively prevent the shower curtain rod from sagging.

4. Drive the tented wire with the fitting into the wall and tighten the tent.

5. Apply some glass glue on the cylinder according to the assembly (the purpose of coating the glass glue: one is to increase the lubrication, it is easy to install; the other is that after the glass glue is solidified, the shower curtain rod will be more durable).

6. Clean the wall and wipe off the excess glass glue. After 24 hours, it can be used normally.

we produce inoculant 10000mt/year,Silicon Barium 5000mt/year,we export the material to india,Russia,Europe ect.

specification:A  si:68%min Ba:4-6% Al:2%max c:1%max

                 B  si:70%min Ba:1.5-2.5%min Al:2%max c:1%max

Barium Inoculant

Barium Inoculant,Ferro Silicon Inoculant,Ferrosilicon Calcium Barium,Silicon Barium Inoculant,Ba Inoculant

Shizuishan Ketong Metallurgy Industry And Trade Co., Ltd. , https://www.ketongmetallurgy.com