Living in steel and concrete for too long, people always look forward to nature. Solid wood furniture is mainly wood, and its natural texture and comfortable feel make it very popular. No matter how good things are needed, care should be taken. If solid wood furniture does not pay attention to daily protection, it will affect the service life. So how to protect this natural wood furniture? 1, avoid direct sunlight solid wood furniture Although the winter sunshine is not intense during the summer, the prolonged exposure to the sun and the already dry climate make it easy to dry the wood, causing cracks and partial fading. Therefore, in daily life, the placement of furniture should be avoided as long as the outdoor sunlight to the whole or part of the long-term exposure of the furniture, or use transparent gauze curtains to separate direct sunlight, so that does not affect the indoor lighting, but also to make the soft The light adds a warm and romantic atmosphere to the living room while protecting the interior furniture. 2, gently move to avoid bumps and scratches Solid wood furniture can be regarded as a high-end item in wooden furniture. If you accidentally scratch or break it, it's a pity. When handling or moving furniture, handle it gently, and do not pull it hard so as not to damage it. Tables and chairs can't be lifted up and fall off easily. They should be lifted from both sides of the table and under the chairs. The cabinets are better to remove the doors and lift them, which can reduce the weight and also avoid the door movements. If you need to move a particularly heavy piece of furniture, you can use a soft rope to slide it under the furniture chassis and lift it. When cleaning, avoid touching the furniture with the cleaning tools. Do not allow the hard metal or other sharp objects to collide with the furniture to protect the surface from the appearance of hard marks and hanging wires. 3, away from heat and corrosive substances Do not place overheated or overcooled items on solid wood furniture, keep away from open flames, and do not expose corrosive materials such as alcohol, banana water, gasoline, nail polish, strong acids, and alkalis to the furniture surface. These will cause hard-to-repair damage to solid wood furniture. 4, to avoid uneven placement of solid wood furniture The floor on which the furniture is placed must be kept flat, and the four legs of the furniture should be stable and stable. If the furniture is placed in a state where it is often shaken and unstable, it will cause the hammer or fastener to loosen and the adhesive part to crack. This will also affect the service life of the furniture. The solution is to modify the ground, or use a slightly larger area of ​​hard plastic plate to achieve the purpose of flattening the four legs of the furniture. 5, to avoid heavy pressure on solid wood furniture The furniture surface avoids placing heavy objects for long periods of time, especially televisions, fish tanks, etc., which can easily cause furniture deformation. When placing things on solid wood furniture, a layer of cloth should be laid on the surface to prevent dents from being generated. Solid wood furniture considerations Metal Stamping Parts,Stainless Steel Stamping Parts,Stainless Steel Metal Stamping,Stainless Steel Stamping NINGBO AIKEHAN METAL PRODUCT CO.,LTD , http://www.diecastingsupplier.com
