Five Walls Paint Step Wall Paint How to Construct

For wall decoration, many users will choose to paint paint, this approach is more affordable, decorative time is longer. What are the steps of the wall painting ? Today, we will introduce the following contents, and take a look at the wall painting steps !

Wall painting steps - wall cleaning

In order to ensure the wall painting effect, before the construction, the wall must first be cleaned to ensure that the grass-roots level is smooth. The surface of the grassroots floor shall be completely removed so that the wall surface is free from dust, and then the construction of the interface agent shall be performed. The thickness of the brushing shall be uniform. The purpose of this is to completely seal the base layer and increase the strength. After the walls are dry for a few hours, the next step of construction can be carried out. However, if the interface agent is not used, it is better to roll the water once in a dry indoor environment to facilitate the later construction.

Wall painting step - scraping putty

Before the scraping of the putty, the wall surface needs to be leveled. The flatness can be determined by a special inspection tool. If there is any unevenness, plaster should be used to make the flattening. Then, in the construction step of scraping the putty, it is generally sufficient to scrape it twice. If the area is not flat, it needs to be scraped several times, and each putty construction should be conducted with sufficient intervals. In addition, the putty scraping is too thick, and cracks on the wall are prone to occur. Thickness needs to be controlled.

Wall painting steps - paint construction

After the putty is well scraped, the construction of the paint is then required, and the primer is first applied. The purpose is mainly to improve the waterproof and moisture resistance of the wall surface, and also to increase the adhesion effect of the top paint. Again, it is the construction of the finish. The first time the top coat needs to be mixed with some water to allow the wall to be fully wetted and completely dried, before the final coat of finish is applied. If you use a roller coating, it is best to use a coarse roller to brush, and then repeat the construction of the fine roller, so that the paint surface will be more delicate.

Wall painting step - grinding process

After the walls are completely dry, they need to be polished, and the walls are polished with fine sandpaper, which will make the walls look smoother. During construction, you can touch it with your hand to feel the smoothness of the next wall. This facilitates the identification of the areas that need to be polished. In addition, special attention must be paid to the strength of the construction. The area to be polished must be wider.

Wall painting steps - acceptance work

When it is polished, inspection and acceptance work is required. In fact, it is performed by hand and visual inspection, for example, to see whether there are cracks in the wall, pores, and whether it feels smooth.

About the wall painting step , Xiao Bian introduced it here for the time being. I hope to help you. If you want to learn more about the construction of paint, you can pay attention to this site information, more exciting content waiting for you.

Wall painting steps

Hydrazine Hydrate

Hydrazine Hydrate,Colorless Liquid Hydrazine Hydrate,Colorless Transparent Liquid Hydrazine Hydrate,Hydrazine Hydrate 24%-80%

Yibin Tianyuan Group , https://www.ybtyco.com