A rechargeable Table Lamp is a portable lighting device that can be used on a table or desk. It is designed to be powered by a rechargeable battery, eliminating the need for constant connection to an electrical outlet. Rechargeable Table Lamp,Porable Table Lamp,Porable Rechargeable Table Lamp,battery Table Lamp Zhongshan Seekyo Lighting CO., Ltd. , https://www.seekyomodernlamp.com
These lamps typically come with a charging base or cable that can be plugged into a power source to recharge the battery. Once fully charged, the lamp can be used wirelessly for a certain period of time, depending on the battery capacity and the brightness settings.
Rechargeable table lamps often have adjustable brightness levels and may also offer different lighting modes, such as warm or cool light options. Some models may even come with additional features like a built-in USB port for charging other devices or a touch-sensitive control panel for easy operation.
These lamps are popular for their versatility and convenience. They can be easily moved around the house or taken outdoors, making them ideal for areas where there is no access to electrical outlets or during power outages. Additionally, they are often designed with stylish and modern aesthetics, making them a decorative addition to any room.
Overall, a rechargeable table lamp provides a portable lighting solution that is both practical and aesthetically pleasing. It offers the flexibility to use it wherever needed without the hassle of cords or the need for constant battery replacement.
FPZ plastic self-priming pump routine maintenance and repair methods
All pumps in the use of regular maintenance and repair to be done in order to ensure that the operation can be normal operation, and now to say FPZ-type plastic self-priming pump maintenance and repair methods. FPZ-type plastic self-priming pump FPZ-type plastic self-priming pump maintenance and repair methods 1, after using a period of time and found self-priming pump mechanical seal face leakage, is caused by the end face wear, Screws, suitable for advancing, hand pump shaft rotation to easily without resistance is better, too loose will have a leak, too tight and easy to wear and tear affect the life of the mechanical seal. 2, the daily boot 8 to 16 hours the best. 24-hour continuous operation of spare parts, regular replacement of maintenance, replacement period is generally two to three months, due to be removed to overhaul. Does not affect the production, non-continuous operation of production at any time overhaul. 3, the transmission medium than students born greater than 1.2 should be reprovisioning the motor, otherwise it will affect the head or lead to motor burnout. 4, the disassembly order: remove the motor, bracket, floor screws, remove the mechanical seal cover, cooling water Tsui, loosen the ring ring ring bolts, static pressure plate bolts, front and rear pump cover bolts, the impeller shaft rod set screws Unscrew and unscrew 3 ~ 5mm, hit the rod with a hammer, loose the impeller, remove the rod, impeller and mechanical seal, should be manually operated when unloading mechanical seals, do not use metal tools to beat, to prevent damage. 5, overhaul: self-priming pump casing, front and rear pump cover, impeller, mechanical seal components within the dirt, and flush clean, non-destructive can continue to use, check the mechanical seal at both ends for damage, moving ring end wear or Scratch less available fine gold sand on the flat grinding, can continue to use. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)