Today, modern architecture pays more attention to the appearance of the model, but gradually reduces the construction process requirements. However, the high-quality building must not only be unique in appearance, but also ensure the decoration construction process. The process of the indoor construction process includes groundwork, stone floor, ceramic floor tiles, and wooden floor coverings. The following small series to introduce the ground under the stone paving process flow. Ground stone paving process 1. Ground floor cleaning: Only ensuring that the ground floor does not contain any impurities can guarantee that the subsequent process will not have problems. 2, cement mortar: cement mortar is brushing on the ground, cement mortar to be polished in order to ensure that the installation of bricks when the uneven situation. 3, calibration high, bullet line: This step is to facilitate the stone laying, speed up work efficiency. 4, plate soaking wet: After the plate soaked with water, it is conducive to installation. 5, the installation of standard blocks: The installation of standard blocks need to pay attention to the installation in accordance with the diagonal, otherwise it will affect the laying of the entire project. 6, paving cement mortar: This step is mainly for better paving stone. Paving stone: When paving stones should pay attention to the fit of each piece of stone. 8, pouring gap: There is a gap between the stone and stone, so filling is to allow no gap between the stone. 9, cleaning: When all the steps are done, wipe the stone, bright stone, clean. 10, maintenance delivery: After the completion of cleaning work, it is not possible to stay, but also a period of maintenance. Construction points: 1. The grassroots treatment should be clean, and the unevenness must first be leveled and repaired. The grass-roots level should be clean and there should be no mortar, especially lime-ash mortar, oil stains, etc., and wet the ground with water. 2. When installing paving stones and porcelain tiles, standard blocks must be placed. The standard blocks should be placed at the cross intersection and installed diagonally. 3. When paving operation, each line must be hung in sequence. The stone must be soaked in water and damp, and wipe the back after drying. 4. The conservation of stone and porcelain tiles after pavement is very important. After 24 hours of installation, they must be sprinkled with water and covered with sawdust. Edit Summary: On the ground stone paving process flow of relevant information to introduce here, and I hope this article to be helpful. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible. Ground acceptance brick Stevia Mint Candy, all natural and sugar free, natural flavor Stevia Mint Candy Stevia Mint Candy,Fresh Mints Candies,Fruit Flavor Mint,Fresh Mints Candies JINING USP INTERNATIONAL CO.,LTD. , https://www.uspintl.com
