SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder

Model NO.: KEN 9950
Trademark: Shinsen
Origin: Jiangsu, China
Model NO.: KEN 9950
Trademark: Shinsen
Origin: Jiangsu, China
Armatures For KEN 9950

SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder
SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder


 
For ACC 100 For Hammer 04-100 For LG G704(LG  G704)
For AEG-100 For Hammer 05-180 For LG180(TGC-150HP)
For Bainai 100 For Hammer 125 For liangyou 8100(new)
For Black&Decker 180(KG2023) For Hammer02-180 For Lunda 100
For Black&Decker 230 For Hammer05-150(Ulite 150) For Makita 230
For Black&Decker 6288(KG15) For Hammer07-100 For Makita 9006B
For black&Decker P5516 For Hanmmer 02-100 For Makita 9067
For Boda G10-100 For High Speed 100(flat) For Makita 9523B
For Bosch 180(GWS20-180) For High Speed 100(HSB-100) For Makita 9523NB
For Bosch 230(GWS20-230) For High Speed 100(HSB-100N) For Makita 9555
For Bosch 230(GWS23-230) For High Speed 100(thick) For Makita 9556
For Bosch 7-100 For High Speed 125(HDE-125,long) For Makita N9500N
For Bosch gws150 For High Speed 150(HD-180) For Maktec 100
For Bosch100(GWS6-100,new) For Hitach 150(G15SA) For Maktec 953
For Bosch100(GWS8-100,old) For Hitachi 100(new) For Maktec 954
For Bosch125(GWS7-125) For Hitachi 125(G13SB) For Maktec MT240
For Bosch125(GWS8-125) For Hitachi G10SF3 For MH 100(invert)
For Changchun AEG100 For Hitachi G10sp(thin) For MH-100A
For Chengdu 100(new) For Hitachi150(G15SA2,short&new) For Moli 100
For Chengdu 100(new.with trace) For Hitachi180(G18SC,short) For Panasonic 100
For Chengdu 125 For Hitachi180(G18SE2,new) For Panasonic 100(thick)
For Copy High Speed 100 For Jepson 4104N For Ruiben 6500
For Copy Keyang 100 For Juying 180 For Ryobi 125(150)
For Copy LG 100 For KEN 9911B For Ryobi100(G-100DL,long)
For Copy Makita 9523 For KEN 9913 For Sanjian 100
For Copy Toshiba 100 For KEN 9916B For Talon 100(thick)
For Dayu 100 For KEN 9916C For Tiedao 100
For Dewalt 125 For KEN 9917 For Tiedao 9523
For Dewalt 180(DW848) For KEN 9950 For Toshiba 100(DG-100C)
For Dewalt 230 For Keyang 100(DG-100H,new) For Toshiba DGP-13
For Dewalt 803 For Keyang 100B For Toshiba100(DG-10B,long)
For Dragon SD04-100A For Keyang 100H For Toshiba100(DGD-100A,short)
For Dragon SD04-125 For Keyang 100H(new) For Toshiba100(DGD-100C,new)
For Dragon SD05-100A For Keyang100(DG-100B,new) For Ulite 100(9388U)
For Hammer 01-100A For Keyang100FA(DGJ-100FA) For Ulite 9314
For Hammer 01-100B For LG 100(TGC-100SA) For Zhejiang Yongkang 100
For Hammer 02-150 For LG 100(thin) For Zhejiang Yongkang 150
For Hammer 03-100 For LG G604(LG  G604) For Zhongjian 100



SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder


During the time of using product, our company will organize technical staff and inspectors to consult users on product quality, usage status, and improvement opinions so that we can improve better product quality.


OUR SERVICES:
1) Quality & Service: We take care of the product quality in order to provide good service to our customers.
2) Price: In order to serve better to our customer we are always finding the way to reduce the price.
3) Special Service: In this competitive world we always provide a promotion offers to our customer so our customer can able to save a good amount.
 
OUR ADVANTAGES:
1) MOQ: We can supply you the quantity you want.
2) OEM: We can produce the goods as per the customer requirement.
3) Service: We are much more concern for the ON TIME DELIVERY & QUALITY. 

FAQ
1.What is your MOQ?
Different model has different MOQ..

2.Can I use my own logo and design on products?
YES, OEM is welcomed.

3.How long is the delivery time?
A:2-7 days for the sample order.
B:20-30 days for LCL or FCL order.

4. Q: Can I get some samples? 
A: We are honored to offer you samples for quality check.

5. Q: Do you have the products in stock? 
A: Yes, We have sample for several models now could supply to you.

6. Q: What's the delivery time?
A: It usually takes about 45 days to produce an order from MOQ to 20FT container. But the exact delivery time might be different for different orders or at different time.

7. Q: How does your factory do regarding quality control? 
A: Quality is priority. People always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment. Armatures For KEN 9950

SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder
SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder


 
For ACC 100 For Hammer 04-100 For LG G704(LG  G704)
For AEG-100 For Hammer 05-180 For LG180(TGC-150HP)
For Bainai 100 For Hammer 125 For liangyou 8100(new)
For Black&Decker 180(KG2023) For Hammer02-180 For Lunda 100
For Black&Decker 230 For Hammer05-150(Ulite 150) For Makita 230
For Black&Decker 6288(KG15) For Hammer07-100 For Makita 9006B
For black&Decker P5516 For Hanmmer 02-100 For Makita 9067
For Boda G10-100 For High Speed 100(flat) For Makita 9523B
For Bosch 180(GWS20-180) For High Speed 100(HSB-100) For Makita 9523NB
For Bosch 230(GWS20-230) For High Speed 100(HSB-100N) For Makita 9555
For Bosch 230(GWS23-230) For High Speed 100(thick) For Makita 9556
For Bosch 7-100 For High Speed 125(HDE-125,long) For Makita N9500N
For Bosch gws150 For High Speed 150(HD-180) For Maktec 100
For Bosch100(GWS6-100,new) For Hitach 150(G15SA) For Maktec 953
For Bosch100(GWS8-100,old) For Hitachi 100(new) For Maktec 954
For Bosch125(GWS7-125) For Hitachi 125(G13SB) For Maktec MT240
For Bosch125(GWS8-125) For Hitachi G10SF3 For MH 100(invert)
For Changchun AEG100 For Hitachi G10sp(thin) For MH-100A
For Chengdu 100(new) For Hitachi150(G15SA2,short&new) For Moli 100
For Chengdu 100(new.with trace) For Hitachi180(G18SC,short) For Panasonic 100
For Chengdu 125 For Hitachi180(G18SE2,new) For Panasonic 100(thick)
For Copy High Speed 100 For Jepson 4104N For Ruiben 6500
For Copy Keyang 100 For Juying 180 For Ryobi 125(150)
For Copy LG 100 For KEN 9911B For Ryobi100(G-100DL,long)
For Copy Makita 9523 For KEN 9913 For Sanjian 100
For Copy Toshiba 100 For KEN 9916B For Talon 100(thick)
For Dayu 100 For KEN 9916C For Tiedao 100
For Dewalt 125 For KEN 9917 For Tiedao 9523
For Dewalt 180(DW848) For KEN 9950 For Toshiba 100(DG-100C)
For Dewalt 230 For Keyang 100(DG-100H,new) For Toshiba DGP-13
For Dewalt 803 For Keyang 100B For Toshiba100(DG-10B,long)
For Dragon SD04-100A For Keyang 100H For Toshiba100(DGD-100A,short)
For Dragon SD04-125 For Keyang 100H(new) For Toshiba100(DGD-100C,new)
For Dragon SD05-100A For Keyang100(DG-100B,new) For Ulite 100(9388U)
For Hammer 01-100A For Keyang100FA(DGJ-100FA) For Ulite 9314
For Hammer 01-100B For LG 100(TGC-100SA) For Zhejiang Yongkang 100
For Hammer 02-150 For LG 100(thin) For Zhejiang Yongkang 150
For Hammer 03-100 For LG G604(LG  G604) For Zhongjian 100



SHINSEN POWER TOOLS Rotor Armatures for KEN 9950 Angle Grinder


During the time of using product, our company will organize technical staff and inspectors to consult users on product quality, usage status, and improvement opinions so that we can improve better product quality.


OUR SERVICES:
1) Quality & Service: We take care of the product quality in order to provide good service to our customers.
2) Price: In order to serve better to our customer we are always finding the way to reduce the price.
3) Special Service: In this competitive world we always provide a promotion offers to our customer so our customer can able to save a good amount.
 
OUR ADVANTAGES:
1) MOQ: We can supply you the quantity you want.
2) OEM: We can produce the goods as per the customer requirement.
3) Service: We are much more concern for the ON TIME DELIVERY & QUALITY. 

FAQ
1.What is your MOQ?
Different model has different MOQ..

2.Can I use my own logo and design on products?
YES, OEM is welcomed.

3.How long is the delivery time?
A:2-7 days for the sample order.
B:20-30 days for LCL or FCL order.

4. Q: Can I get some samples? 
A: We are honored to offer you samples for quality check.

5. Q: Do you have the products in stock? 
A: Yes, We have sample for several models now could supply to you.

6. Q: What's the delivery time?
A: It usually takes about 45 days to produce an order from MOQ to 20FT container. But the exact delivery time might be different for different orders or at different time.

7. Q: How does your factory do regarding quality control? 
A: Quality is priority. People always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.

High Speed Door

High speed shutter door is a rapid operating, anti-crash shutter door for indoor application . The most advantage of this door is that the opening/closing speed can reach to 0.6-1.8m/s, really fast action a lot than tranditional rollling shutter door. short opening and closing times reduce cooling loss, avoid airflow and enable a smooth operating procedure. They can also be designed in larger dimensions for the mining and aircraft industries.

High speed door can be easily installed, economical,quiet and efficient with electromechanical drive.

This door quickly though in/out open gate, ideal for warehouses,factories, hangars use, widths can be from 2m to 20 meters.

The material of this door are variety: PVC curtain to keep the insdie clean, heavy duty aluminum door with wind-resisitant function can wrok in heavy windy weather, and also the freezer door can be used in cold warehouse or somewhere like that.

Including models are:PVC High Speed Door, Aluminum Spiral High Speed Door, Self-Recovery repair door, Cold Storage Room Fast Door.

high speed door


High Speed Door,PVC High Speed Door,Aluminum High Speed Door,Spiral High Speed Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com