Entrance decoration restaurant decoration decoration interior decoration house layout wallpaper For infants 0-3 years old, most of the time is spent indoors. At this stage, the baby's body resistance is relatively low. Therefore, the baby is provided with an environment-friendly, safe and comfortable indoor environment for the healthy development of the child. Growth is very important. To put out a green baby room, we must strictly sing "four steps": green building materials, green construction, testing and treatment. For infants 0-3 years old, most of the time is spent indoors. At this stage, the baby's body resistance is relatively low. Therefore, the baby is provided with an environment-friendly, safe and comfortable indoor environment for the healthy development of the child. Growth is very important. For infants 0-3 years old, most of the time is spent indoors. At this stage, the baby's body resistance is relatively low. Therefore, the baby is provided with an environment-friendly, safe and comfortable indoor environment for the healthy development of the child. Growth is very important. The so-called environmental protection means that there is no indoor air pollution, radiation pollution and light pollution, noise pollution; safety means that indoor furniture and other items will not cause harm to children; the scope of comfort is relatively wide, including the first two... For infants 0-3 years old, most of the time is spent indoors. At this stage, the baby's body resistance is relatively low. Therefore, the baby is provided with an environment-friendly, safe and comfortable indoor environment for the healthy development of the child. Growth is very important.
UPE plastic,full name UHMWPE (ultra high molecular weight polyethylene) is a kind of thermoplastic engineering plastic with excellent properties of linear structure, with a molecular weight of more than 1.5 million.mainly have ESD UPE SHEET,CONDUCTIVE UPE.
Small density, good wear resistance, self - lubricity, impact resistance, corrosion resistance and so on.
Advantages:
1. Average molecular weight about 5,000,000 to 9,000,000;
2.The best abrasive assistance of all plastics , which 4 times higher than that of nylon 66 or teflon and 6 times higher than that of carbon steel;
3.Extremely high impact stength ,which is twice as high as PC ,5 times as high as ABS,it also retaines high toughness at liquid nitrogen temperature (-196'C);
4.Low friction coefficient ,lubricity is equal to that of Teflon ;
5.The best impact energy absorption value of all plastics ,with very good sound reduction effect ;
6.High chemical stability ,capable of resisting various types of corrosion and organic media within certain temperature and concentration range;
7.Strong adhensive resistance which is only second to Teflon;
8.UHMW-PE Plastic is safe , healthful and non-toxic and be can used in contact with food and drugs ;
9.Low density than any other thermoplastic ;
10.Excellent electrical insulation and static resistance ,good resistance to high energy radiation;
11.Moderate mechanical strength,stiffness and creep-resistant property'
12.Outstanding machining property ,very low water absorption .
Deficiencies:
Compared with other engineering plastics, UHMW-PE Plastic is resistant to heat resistance, stiffness and hardness, but can be improved by means of "filling" and "crosslinking".
From the point ofheat resistance, the melting point of UHMW-PE Plastic is approximately the same (136 ℃) and ordinary polyethylene, but because of its big molecular weight, melt viscosity high, so the processing difficulty is big.
Applications:
Papermaking industry : suction box boards ,scrapper,molding plate ,beating ,gear .
Mining industry : charging barrel ,abrasive and adhensive -resistant back lining for warehouses.
Chemical industry : acid pump ,fliter plate , worm gear ,bearing .
Food industry :packing machinery parts ,bottle guide ,screw .wear plate ,slide away ,stud weld ,roller and other transmission parts.
Tenxile industry : buffer board
Food processing industry : chopping block ,refrigerating plant
Wharf:anti-collision board
Specification: the thickness of UHMW-PE Plastic sheet material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width can exceed 1200mm, and the length is not limited.
Color: Black and white, can also be made another color, and the color order is 500KG.
Modified varieties: UHMW-PE Plastic can be added to the Glass Fiber, copper powder, and molybdenum disulfide enhancement plate according to customer's requirements.
Product certification: most environmental certification reports and safety reports forraw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
To give children a green baby room, decoration must choose green building materials. However, instead of using green materials, it will certainly be a green decoration. Any kind of decoration materials may be in line with environmental standards and are all green. However, after a variety of materials are brought together, the situation will change. The release of harmful substances is closely related to changes in temperature and humidity. Therefore, to install a green baby room, we must strictly sing "four parts": green building materials, green construction, testing and governance.
Decorative materials selected green In the renovation of the baby room should use natural and environmentally friendly materials, such as wooden materials. Specifically, the decoration of the house, the ground, the wall surface, and the lighting are the three major projects. Therefore, the decoration materials for the baby room must pay attention to these three categories.
Floor: The floor of the baby room is preferably made of solid wood flooring or environmental protection carpets. These materials are natural and environmentally friendly, and they are soft and warm. They are suitable for children to play and learn to climb away.
Wall: The decoration of the baby room. The wall is decorated with environment-friendly fabric wallpaper. It is neither afraid of the picture nor easy to clean.
Luminaires: Luminaires in baby rooms should be different depending on location. The ceiling light should be bright; the wall light should be soft; the table lamp must not be stabbed. The ceiling light is best to use a number of small spotlights, the angle can be arbitrarily turned, not only conducive to lighting, but also help protect the baby's eyes.
Construction must be environmentally friendly
After the decoration and decoration materials have undergone processing and construction, they have undergone changes in form, and the release of harmful substances in the decoration and decoration materials will inevitably change accordingly. Therefore, the decoration of the baby room should choose the decoration materials with less processing procedures. With the principle of “no pollution, easy to clean upâ€, try to choose natural materials as much as possible. The fewer processing procedures in the middle, the better. For example, some imported baby wallpapers or high-quality wall paints meet this principle, with less harmful substances and easy scrubbing.
Environmental standards
According to the relevant national regulations, the main indoor environmental indicators in the baby room are: carbon monoxide is less than 5 milligrams per cubic meter; the humidity should be guaranteed between 30% and 70%.... Other indoor environmental indicators are: artificial board used in the decoration project. The formaldehyde emission limit value should be less than 1.5mg/L; the maximum allowable concentration of harmful substances in the air of residential areas is ammonia air standard, and the control concentration of ammonia gas per cubic meter of air is not more than 0.2mg.
It has been mentioned many times above that after the baby room is renovated, it must be noted that ventilation and ventilation are the best choices. According to tests conducted by indoor environment experts, the frequency of indoor air replacement directly affects the content of indoor air harmful substances. The more frequent indoor ventilation or the use of air filters, displacers, etc., the less harmful or harmful substances in the air will be.
This information is for reference only, please use caution 
Previous
Chalkboard drawing effect of a cement panel wall Next
What should children pay attention to when choosing a pillow? 
submit
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 600mm* 1200mm, and the commonly used specification of 10-180mm is 1200*3080mm. UHMW-PE Plastic can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited.
Add antistatic agent to the permanent plate, the volume resistance value of 10 to the 6 to 9 power.
Add flame retardant to the flame retardant board from UL 94v-0 to HB combustion grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.
UHMW-PE Plastic Sheet,Color UHMWPE Sheet,Antistatic UHMWPE Plastic Sheet,Esd UHMWPE Plastic Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com