Villa design furniture brand furniture decoration TV background wall renderings backdrop wall effect bathroom design overall bathroom bathroom door bathroom design home decoration home improvement home home design home furnishings Besides prime quality Electrolytic Tinplate, we can also provide Tin Can Accessories, including but not limited to tops and bottoms, EOE, earing, handlings, lugs. It's with good quality and competitive prices. Tin Can Accessories Tin Plates,Metal Tinplate Covers,Tinplate Cans Metal Sheet,Tinplate for Lids Jiangsu Guolian New Material Co., Ltd. , http://www.cntinplate.com
Home decoration design contract
Party A: ____________________________________________
Address of residence: __________________________________________________________
Contact Phone: _______________________ Mobile Phone Number: _________________________
Party B:
company name:
Address: Service Phone:
Design Manager: _____________ Telephone:____________ Mobile:
According to the "Law of the People's Republic of China on Economic Contracts" and the relevant provisions of the decoration industry, this contract is signed by both parties and executed jointly.
The first project Party A entrusted Party B to undertake the following home decoration design tasks:
Project address:_____________________________
Article 2 Design Charges and Payment Methods (1) The project design fees shall be implemented in accordance with the national and current market charging standards.
The agreed design fee between A and B is RMB/m2 (the area within the suite, excluding the computer renderings), and the estimated total charge is _____yuan, and the amount is capitalized by _____ yuan.
(II) Payment Methods Both Party A and Party B adopt the following payment methods: 1. Advance payment of 1,000 yuan (including 200 yuan for door-to-door measurement and 800 yuan for the project);
2. After the plan is passed, a complete set of construction drawings will be issued. The customer will pay the balance and take the full set of drawings.
3, out of the computer renderings, price: 800 yuan / Zhang (A4);
Article III Design Agreement and Date of Completion (1) Detailed design instructions shall be provided in the design drawings provided by Party B.
(II) Flat facade view 1, original room layout 2, wall transformation diagram 3, plane furniture layout diagram 4, floor diagram 5, ceiling diagram 6, site-produced furniture elevation (according to the actual situation or not)
7, the door elevation map (out or under the actual situation)
6. Partial elevation of kitchen and bathroom (except custom-made kitchen)
7. Elevation of the TV background wall. 8. Elevation of the wall surface to be erected at other sites. (C) Sectional drawing 1. Material, material, color, etc. 2. Door and window cover profile 3. Entrance profile 4. Smallpox Section 5, TV background wall section 6. Other sections requiring construction section (IV) Hydropower construction plan (5) Both parties agree that the plan of the plane shall be completed within 7 days from the effective date of the contract;
After Party A passed the Plan Plan, Party B completed the whole set of construction drawings within 7 days.
Article 4 Responsibilities of Both Parties (1) Responsibilities of Party A 1. Submit the necessary materials for the design (property plans and structural plans approved by the property) to Party B as scheduled, and ensure that the quality of the submitted materials meets the engineering design requirements;
2. Pay the advance payment and engineering design fee of Party B according to the agreed date and quantity;
3. If the processing orders for the construction materials and equipment of this project are required to be cooperated with the design personnel of Party B, the necessary expenses shall be borne by Party A;
4. After the two parties determine the plan, during the construction drawing design phase, the original design plan needs to be changed due to Party A's reasons (such as the change of the overall style, the overthrow of the overall plan, etc.), and does not include the partial modification of individual room layout and furnishings. ),
Party A shall pay Party B a 30% design rework fee in a lump and proceed with the second plan design;
(2) Party B's responsibilities 1. Party A will pay the design documents stipulated in this contract as scheduled, and ensure that the quality of the design documents meets the requirements of relevant national regulations and standards, and meets Party A's requirements for construction and use;
2. Responsible for the design and delivery of the engineering design projects listed in this contract before the start of construction (only one time);
Article 5 Liability for breach of contract (1) When Party B fails to submit the design documents according to the time stipulated in this contract due to Party B's reasons, Party B shall, from the next day after the date of submission, calculate and compensate Party A for the delay of design damages of 100 yuan in default/day;
(2) When Party B fails to perform the contract, Party B shall return Party A's advance payment twice and return all the design fees other than the advance payment already collected;
(3) If Party A fails to pass the plan made by Party B, Party B will refund the plan fee in Party A's advance payment, but the measurement fee will not be refunded. At the same time, the plan drawing shall be owned by Party B;
(4) If Party A approves the plan but does not approve the construction drawing, Party A will not refund all advance payments and shall not take away the construction drawings.
Article 6 Entry into Force, Termination, and Closure of the Contract (1) This contract shall be valid after being signed by Party A and Party B is affixed with the official seal of the unit legal person (the person in charge of the unincorporated company is responsible). The effective date of this contract shall be signed by the last party of both parties ( Or date stamped shall prevail.
(2) This contract shall provide Party B with all the home improvement design documents stipulated in this contract to Party A. Party A shall terminate this contract relationship as of the date of payment of the full design fee in this contract, except as otherwise stipulated in this contract.
Article 7 Settlement of Contract Disputes In the course of implementation of this contract, disputes will arise. When the parties fail to negotiate, they shall adopt the following ____ ways to solve the disputes:
First, apply to the Consumer Council for mediation;
2. Proceeding to a people's court with jurisdiction;
Third, other solutions: _______________.
Article 8 Unfinished Matters and Additional Provisions (1) The matters not covered in this contract shall be determined through consultation between both parties and form a written agreement to be executed as an attachment to this contract.
(b) The additional terms of this contract are as follows:
1. The designer is responsible for the design bottoming out of the engineering design projects listed in this contract before the start of construction (only one time);
2. The designer shall provide the technical problems related to the design in a timely manner during construction of the project (secondary service);
3, the designer to participate in the acceptance of the project completion (site inspection and acceptance of the site) for free (once);
4, after the design is completed by the engineering assistant to provide a detailed list of quantities;
5. Designers provide services to accompany the selection of furniture and soft furnishings (once);
Article 9 Contract text 1. This contract shall become effective after the parties have signed (stamped) it with both parties.
2. After the signing of this contract, Party B may not subcontract the design project.
Third, the contract in two copies, A and B each hold one.
Fourth, the contract will be automatically terminated upon completion.
5. This contract implements the principle of voluntary client verification, and submits the text of the contract to the Industrial and Commercial Administration Sub-bureau in the district where it is located to perform contract verification to protect the legal rights of both parties to the contract.
person A person B:
Signature: Signature:
Signing address: Signing address:
Contract date: Contract date:
Suggested download:
Attachment.php?aid=27122
Tin cans tops and bottoms, with inside and outside lacquering: plain white, gold, transparent, or with printed logos. They are suitable for cans from 2.5L up to 20L.
Aluminium EOE, tinplate EOE, pear off caps, crown caps are all available.
We can provide various earings and handlings, made from tinplate or plastic.They are very strong and safe.
It's qutie cost-effective to buy from us, and we can provide quick lead time.
Renovation Topic: "Contract/Budget" Notes
Chapter 1 contract template to see what the contract should be like ~