In the renovation, the load-bearing wall cannot be changed and many people know it. But what kind of wall is a load-bearing wall, not many people can make it clear. Generally, in a brick-concrete structure, all prefabricated walls cannot be dismantled or doors can be opened; brick walls larger than 24 cm are also load-bearing walls and cannot be removed or modified. The walls that are knocked on by the “quiet voice†are mostly non-bearing walls and can be demolished. In addition, some people open the window on the load-bearing wall, which also undermines the weight of the wall. It is also not allowed. If you want to demolish the wall in the house during the renovation, it is best for construction professionals to look at it to determine if it is a load-bearing wall before construction. Prior to construction, the property management department should also report to the record and be approved for construction. Reinforcement in the wall If the housing structure is better than the body of an adult, the reinforcement in the wall is the bones of the person. If the steel is damaged when the pipeline is laid, it will affect the bearing capacity of the wall and the floor. In the event of an earthquake, such walls and floors can easily collapse or break. Beams in the room These pillars are used to support the upper floor slabs. After the upper floors are removed, they will fall, so they cannot move. Low wall on the balcony There is a window on the wall between the general room and the balcony. These doors and windows can be changed, but the walls below the windows cannot be moved. This wall is called the weight wall. It acts like a scale to lift the balcony. Demolition of this wall will reduce the bearing capacity of the balcony and cause the balcony to fall. Three or five defense doors The door frames of these doors are embedded in concrete. If the doors are demolished, they will damage the building structure and reduce the safety factor. It also destroyed the building structure at the entrance and it was even more difficult to reinstall the new door. Waterproof layer for bathroom and kitchen Under these grounds there is a waterproof layer. If it is destroyed, the downstairs will become a water curtain hole. Therefore, be careful not to damage the waterproof layer when you replace the floor material. If it is destroyed and reconstructed, it must be done 24 hours of water seepage test that is in the kitchen or toilet water, if the leak is not qualified after 24 hours. Door Many homes in the renovation to "excellent shape" will do a lot of demolition of the door, this will destroy the building structure, it will also reduce the safety factor. The door frames of these “three defenses†or “five-defense†doors are embedded in concrete. If any of the buildings is damaged due to arbitrary demolition, it will be more difficult to reinstall new doors. Remodel brick and mortar houses to be cautious Unreasonable layout, small area, unreasonable function distribution, unreasonable lighting, etc. These are the “common diseases†existing in old houses. Therefore, many people equate new homes with a series of reconstructive projects such as wall-smashing and knocking. In fact, most of the old houses are brick-concrete structures. The wall first plays an important role in bearing earthquake resistance, and the second is the function of enclosing partitions. If only the load-bearing wall is destroyed in order to achieve an ideal spatial pattern, the weight bearing and seismic resistance of the wall will be weakened, resulting in potential safety hazards. The design experts reminded the owners of the renovated old houses that they must reconstruct their nests. They must take into account the structure and safety of the houses. They can boldly innovate on this basis. Otherwise, once they “move their handsâ€, they will be difficult to make up for. damage. Balcony entrance decoration window housing room house decoration house bathroom design bathroom waterproof bathroom door
Introduction Of Product
Features Of Product
Way Of Conection
Scope Of Application
PVC Valves can be applied to the following
Plastic Pipe Fittings, PVC Pipes Fittings, PVC Piping Fittings, PVC Pipes And Fittings JESSRO INDUSTRY CO., LTD. , http://www.pepipefittings.com
JESSRO PVC PIPE & FITTINGS has a long history in our company. And we have full of experience and strong technical in this field. Jessro PVC pipe & fittings have been recommended and promoted in many countries for the high quality and have won the acceptance of the customers and praise.
Saving cost and accelerating the project for the easy installation.
Stronger and high impact.
Light, durable ,convenient.
Low cost and long service life.
First step, clear both end of the pipe fittings.
For socket type, there need to use the corresponding glue on the socket wall again with the pipe and stick them together.
For screw type, there need to use teflon tape winding outer thread screw parts, then smooth twist in the threaded.
Water project in construction.
Water treatment for swimming pool.
Water project in pisciculture.
Irrigation for agriculture.
Several places that cannot be moved in the decoration
Bearing wall