Panel furniture generally needs to be processed into a white blank through a mechanical process, and then the surface is made by a paint process. However, the quality requirements in the process of the panel furniture mechanism are also very important, and the quality directly determines the quality of the blank of the panel furniture, which in turn affects the later stage. What are the quality requirements of the surface painting process and the quality requirements of the panel furniture mechanism? The quality requirements of the panel furniture mechanism are mainly: 1. Process requirements for paper pressing: After processing the plate, the paper must be firm and smooth, and it is not allowed to degumming, separating, bubbles, scratches, wrinkles, rotten paper, indentations and other sundries. 2, the quality requirements of the press: 1) The gluing of the plate should be firm and no degumming is allowed. When the plate is auxiliary, it must be aligned with the adjacent sides of the skeleton. The position deviation of the upper and lower plates after cold pressing is less than 1.5cm. 2) After cold pressing, the surface of the component should be clean and flat. It is not allowed to have obvious skeleton marks, bending deformation, scratches and excess glue. 3), the curved core strip should be tight, the surface is flat, and the transition is natural without glue pollution. 3, the quality requirements of the milling machine: 1) The mold must be made accurately, the shape size after processing is consistent with the drawing, and the tolerance of the non-joined position is ±1.5mm. 2) The processing surface must be smooth, the lines are smooth, the transition is natural, the surface of the parts after processing is smooth, no cracking, scratches, etc., the surface of the parts is clean, no debris, no wood chips. Concerned about surprises Label: What are the quality requirements for the panel furniture mechanism? Previous: Ceiling material process and acceptance method Next: How to get rid of the overall wardrobe odor
The Egg Whisk/Egg Beater is a tool used to whisk egg whites and yolks into egg mixture, stir the whites and yolks into bubbles, for steaming eggs, or to stir the egg mixture with flour together to make cakes.Manual Egg Whisk/egg beater is very common in daily life. The egg whisk/egg beater produced by our factory is made of stainless steel, nylon, silicone with stainless steel, plastic handle and silicone, etc.
Egg Whisk/Egg Beater Egg Whisk,Silicone Egg Whisk,Stainless Steel Egg Whisk,Wire Whisk Yangjiang Yangdong Hongli Industries Co.,Limited , https://www.hongli-industry.com